MDD090B-N-030-N2L-130PR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
5 Seconds
The Bosch Rexroth Indramat MDD090B-N-030-N2L-130PR1 is a synchronous motor from the MDD Synchronous Motors series, made for digital drive controllers. It features a nominal speed of 3000 rpm and provides a continuous torque at standstill of 7.2 Nm. The motor includes a blocking brake with a torque of 6.5 Nm, uses digital servo feedback, and has a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090B-N-030-N2L-130PR1 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, the unit supplies controlled torque and speed to rotary axes in assembly lines, pick-and-place gantries, and other industrial automation equipment. Its electromechanical design supports rapid speed changes while maintaining positional accuracy during repetitive motion. This makes it suitable for indexing tables, transfer units, and similar equipment that requires repeatable acceleration and deceleration. The motor also includes an encoder system so the drive can maintain closed-loop position and speed control throughout each cycle.
A centering seat of 130 mm aligns the flange precisely to mating machine frames and supports repeatable installation. At standstill, the motor can deliver 7.2 Nm of continuous torque, while the integrated blocking brake adds 6.5 Nm when power is removed to help hold the axis in place. The brake is intended to secure the load at rest rather than to absorb continuous stopping energy during normal running. The motor reaches a nominal speed of 3000 rpm during dynamic operation, balancing response and thermal loading in servo applications. Power and feedback cables exit through a right-side connector, which helps keep cable routing compact in crowded machine layouts.
Feedback is provided by digital servo feedback, which returns rotor position data to the controller for precise commutation and axis regulation. The output uses a keyway shaft, and the shaft opening is sealed to help reduce dust ingress at the drive end. The motor has frame length B and size 090, and it uses a single-ended shaft without a rear extension to keep the housing compact for direct connection to pulleys or gearheads. A single shaft end can also simplify coupling selection where only one mechanical output is required. The rotor is balanced to the standard grade, and the housing uses standard protection for general industrial service.
Frequently Asked Questions about MDD090B-N-030-N2L-130PR1:
Q: What kind of shaft type does the MDD090B-N-030-N2L-130PR1 motor have?
A: The MDD090B-N-030-N2L-130PR1 features a keyway shaft type for secure mechanical coupling.
Q: What is the continuous standstill torque for the MDD090B-N-030-N2L-130PR1 motor?
A: This motor provides a continuous torque of 7.2 Nm at standstill.
Q: Does the MDD090B-N-030-N2L-130PR1 have a holding brake, and what is its torque?
A: The MDD090B-N-030-N2L-130PR1 comes equipped with a blocking brake delivering 6.5 Nm of holding torque.
Q: What is the nominal speed of the Bosch Rexroth Indramat MDD090B-N-030-N2L-130PR1 motor?
A: This model operates at a nominal speed of 3000 min⁻¹ for consistent performance.
Q: What type of motor feedback does the MDD090B-N-030-N2L-130PR1 provide?
A: Digital servo feedback (DSF) is included for precise motor control and position feedback.
