MDD090B-N-030-N2L-130GR2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
0 Seconds
The Bosch Rexroth Indramat MDD090B-N-030-N2L-130GR2 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It offers a continuous standstill torque of 7.2 Nm and a nominal speed of 3000 min-1, with a plain shaft and shaft seal. The motor includes a holding brake with 11.0 Nm brake torque and uses digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090B-N-030-N2L-130GR2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for operation with digital drive controllers, the unit supplies regulated torque and speed to automated machinery in packaging, material-handling, and assembly cells. It is intended for closed-loop axes that need stable rotary motion during indexing, positioning, and hold periods. Its 090 frame with length code B gives the motor a compact envelope, and the integrated blocking brake keeps the load immobile whenever power is removed. The motor is suitable for applications that require repeatable speed regulation and controlled load holding during normal machine cycles.
At stall, the motor can deliver a continuous torque of 7.2 Nm, allowing it to support static loads without overheating during rated operation. When commanded to full speed, it reaches a nominal speed of 3000 rpm, which suits rapid cycle tasks on many automated axes. The blocking brake develops 11.0 Nm of torque, so the axis can remain locked during stops or power loss. Mounting accuracy is aided by a centering diameter of 130 mm, which helps align the motor precisely with machine interfaces. Size code 090 matches the mechanical envelope used for this frame. Standard balancing helps limit residual vibration, and the housing dissipates heat through natural convection. The shaft end has no side-B extension, which reduces overall length and simplifies coupling layout.
Electrical power and feedback cables exit on the right side of the housing through a connector, which allows quick cable changes and keeps the connection point easy to access. Rotor position is reported by integrated digital servo feedback, so the controller receives motor position information immediately after power-up. The motor uses a plain shaft that accepts keyed hubs or clamp collars, and a dedicated shaft seal helps prevent lubricant migration into the motor interior. The right-side cable exit also helps in machine layouts where the rear of the motor sits close to guards or mounting plates. The housing style remains compatible with guarded installations that rely on open space around the outer fins rather than internal ducting.
Frequently Asked Questions about MDD090B-N-030-N2L-130GR2:
Q: What is the continuous standstill torque provided by the MDD090B-N-030-N2L-130GR2 motor?
A: The MDD090B-N-030-N2L-130GR2 motor has a continuous torque at standstill of 7.2 Nm.
Q: Does the MDD090B-N-030-N2L-130GR2 motor include a holding brake?
A: This model is equipped with a blocking brake that delivers a holding brake torque of 11.0 Nm.
Q: What type of motor feedback is featured on the MDD090B-N-030-N2L-130GR2?
A: The motor provides digital servo feedback (DSF) for precise motor position information.
Q: What type of shaft and sealing does the MDD090B-N-030-N2L-130GR2 motor use?
A: The MDD090B-N-030-N2L-130GR2 uses a plain shaft with an included shaft seal to help prevent contamination.
Q: What is the nominal speed of the MDD090B-N-030-N2L-130GR2 motor?
A: The nominal speed for this motor is rated at 3000 min⁻¹.
