Product Description:

The MDD090B-N-030-N2L-110PR0 is a synchronous servomotor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts electrical drive commands into regulated rotary motion for automation axes such as packaging stations, transfer lines, and similar production equipment. Its compact frame supports installation in multi-axis systems where available space is limited. Electronic feedback also helps the drive maintain accurate position and speed control during continuous motion and repeated indexing cycles.

At stall, the rotor can deliver 7.2 Nm of continuous torque, which supports steady load holding before acceleration begins. When energized at rated frequency, the shaft reaches 3000 rpm, making the motor suitable for applications that need fast and repeatable movement. Accurate commutation is achieved through digital servo feedback (DSF), so the drive can determine rotor position directly during operation. The flange uses a 110 mm pilot diameter for concentric alignment with mating machine parts. The cable glands face right, which helps keep power and signal conductors clear of nearby equipment in tightly arranged machine layouts.

Power and feedback lines terminate on a connector, which provides a compact connection point for the motor wiring. The output shaft uses a keyway so pulleys, couplings, or similar drive elements can be secured against slip under load. A shaft seal helps keep coolant or oil from entering the bearing area during operation. The motor has length code B, indicating the medium body length in this frame size. It also has a standard shaft end on side A and comes without a blocking brake, so holding force must be supplied by external mechanical means or by the drive system when the axis is stopped.