MDD090B-N-020-N2L-110GL1 Bosch Rexroth Indramat

No Tariffs On US Orders
  • Rated 4.4 (42 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
In-Stock, Ships 3-5 Days

Preparing your secure checkout page...

The Bosch Rexroth Indramat MDD090B-N-020-N2L-110GL1 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor features a nominal speed of 2000 rpm and a continuous torque at standstill of 7.2 Nm. It includes a digital servo feedback system and has a holding brake torque of 6.5 Nm.

Quote Request Form:

Warranty
Wake Industrial Warranty

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The MDD090B-N-020-N2L-110GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts electrical power from a matched drive into controlled rotary motion that can be tightly coordinated with machine cycles. In automated packaging lines, pick-and-place gantries, and material-handling axes, it supplies repeatable position and velocity profiles while exchanging status data with the drive through integrated feedback electronics. Its operating concept suits axes that require repeatable starts, stops, and direction changes during continuous machine cycles.

At a continuous stall point, the rotor can deliver 7.2 Nm of torque, giving machinery adequate holding force when motion is paused but the axis remains energized. Under rated conditions, the shaft reaches a nominal speed of 2000 rpm, balancing dynamic response with service life in medium-inertia loads. A built-in blocking brake supplies up to 6.5 Nm to maintain position during power loss, and it is released automatically when current is reapplied. Position information is generated by Digital servo feedback (DSF), allowing closed-loop accuracy without a separate encoder. For mechanical alignment, the front flange has a centering diameter of 110 mm matched to standard Rexroth mounting patterns. Standard balancing and the B length code help reduce vibration while keeping the motor length moderate.

Cabling enters on the left side through a keyed industrial connector, which helps with cable routing in densely packed cabinets. The drive end uses a plain shaft with a keyway-free finish for rigid clamp couplings, and the standard shaft arrangement omits a second output on side B. A contact lip at the housing provides operation with a shaft seal, which helps limit lubricant escape and keep dust away from the bearing set. The size 090 housing integrates the brake hardware and shaft arrangement into one package that mates directly with Bosch Rexroth digital drives.

Balancing
Standard
Blocking Brake
With 6.5 Nm Blocking Brake
Centering Diameter
110 mm
Connection Direction
Left
Connection Type
Connector
Continuous Torque at Standstill
7.2 Nm
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Housing
Standard
Motor Feedback
Digital servo feedback (DSF)
Motor For Digital Drive Controllers
MDD
Motor Length Code
B
Motor Size
090
Nominal Speed
2000 min⁻¹
Output Shaft
Plain Shaft
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
  • MDD-090B-N-020-N2L-110GL1
  • MDD090B N 020 N2L 110GL1
  • MDD090B-N-020-N2L-110-GL1
  • MDD090BN020N2L110GL1
  • MDD90B-N-020-N2L-110GL1
  • MDDO90B-N-020-N2L-110GL1
  • MDDO9OB-N-O2O-N2L-11OGL1
  • mdd090b-n-020-n2l-110gl1
  • MDD9B-N-2-N2L-11GL1
  • mdd090bn020n2l110gl1
  • MDD09OB-N-020-N2L-110GL1
  • MDD0908-N-020-N2L-110GL1
  • MDD090B-N-O20-N2L-110GL1
  • MDD090B-N-0Z0-N2L-110GL1
  • MDD090B-N-02O-N2L-110GL1
  • MDD090B-N-020-NZL-110GL1
  • MDD090B-N-020-N2L-I10GL1
  • MDD090B-N-020-N2L-1I0GL1
  • MDD090B-N-020-N2L-11OGL1
  • MDD090B-N-020-N2L-1106L1
  • MDD090B-N-020-N2L-110GLI
  • MDDO9O8-N-OZO-NZL-IIO6LI
  • MDD09B-N-020-N2L-110GL1
  • MDD090B-N-20-N2L-110GL1

Frequently Asked Questions about MDD090B-N-020-N2L-110GL1:

Q: Does the MDD090B-N-020-N2L-110GL1 motor include a holding brake?

A: This model is equipped with a blocking brake offering 6.5 Nm of holding torque.

Q: What type of feedback does the MDD090B-N-020-N2L-110GL1 motor provide?

A: The MDD090B-N-020-N2L-110GL1 features digital servo feedback (DSF) for motor feedback.

Q: What is the continuous torque at standstill for the MDD090B-N-020-N2L-110GL1?

A: This motor delivers a continuous torque of 7.2 Nm at standstill.

Q: What is the centering diameter of the MDD090B-N-020-N2L-110GL1?

A: The centering diameter for this motor is specified at 110 mm.

Q: What is the nominal speed rating of the MDD090B-N-020-N2L-110GL1?

A: The nominal speed of this motor is 2000 min⁻¹.


Internal Product Review

  • ‘‘The MDD090B-N-020-N2L-110GL1 is a synchronous motor from the Bosch Rexroth Indramat MDD series, engineered for digital drive controllers and equipped with digital servo feedback (DSF) for precise control. Its 7.2 Nm continuous torque at standstill and integrated blocking brake with 6.5 Nm holding torque make it a strong choice for demanding automation tasks. This motor stands out for its reliability and accurate positioning in industrial environments.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo