MDD090A-N-040-N2M-110PB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD090A-N-040-N2M-110PB1 is part of the MDD Synchronous Motors series and features a nominal speed of 4000 rpm with a continuous torque at standstill of 3.7 Nm. This motor is designed with a 110 mm centering diameter, an integrated multiturn absolute encoder, and includes a holding brake with a torque of 6.5 Nm. It comes with a connector type on side B, a keyway shaft type, and digital servo feedback (DSF).
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090A-N-040-N2M-110PB1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Built for digital drive controllers, it converts regulated DC bus energy into precise rotary motion for positioning, feed, and auxiliary axes in automated production cells, packaging equipment, and material-handling lines. Its compact dimensions, integrated feedback devices, and standardized mounting pattern allow direct installation in multi-axis systems without intermediate transmission stages. This motor is suited to applications that require repeatable starts, stops, and speed changes under closed-loop control.
Mechanical alignment uses a centering pilot of 110 mm, and cables exit on side B to suit panel-mounted drives. The rotor delivers 3.7 Nm of continuous standstill torque, and closed-loop operation is supported up to 4000 rpm. An integrated multi-turn absolute encoder tracks shaft position over multiple revolutions, and the controller receives this information as digital servo feedback (DSF) signals for precise speed and torque regulation. Standard dynamic balancing reduces residual vibration during operation. The motor uses a standard housing finish for typical shop environments, carries frame size 090 with length code A, and omits a non-drive-end shaft extension to keep the overall depth short.
When motion stops, the built-in blocking brake holds the rotor with 6.5 Nm of static torque to help prevent drift on vertical axes. All power, brake, and feedback conductors are routed through a single industrial connector, which keeps cabling consolidated at the motor. Using one connection point also helps keep cable routing compact in confined machine layouts. A factory-installed shaft seal helps protect the bearings from process fluids. The drive end uses a keyway so torque can be transferred to couplings without slip.
Frequently Asked Questions about MDD090A-N-040-N2M-110PB1:
Q: What type of encoder is used in the MDD090A-N-040-N2M-110PB1 motor?
A: This model features an integrated multiturn absolute encoder for precise position detection and control.
Q: Does the MDD090A-N-040-N2M-110PB1 motor include a holding brake?
A: Yes, the MDD090A-N-040-N2M-110PB1 is equipped with a blocking brake that provides a holding brake torque of 6.5 Nm.
Q: What is the continuous torque at standstill for the MDD090A-N-040-N2M-110PB1?
A: This motor delivers a continuous torque of 3.7 Nm at standstill.
Q: What is the nominal speed of the MDD090A-N-040-N2M-110PB1 motor?
A: The nominal speed of the MDD090A-N-040-N2M-110PB1 motor is 4000 min⁻¹.
Q: What feedback type does the MDD090A-N-040-N2M-110PB1 motor utilize?
A: Digital servo feedback (DSF) is the feedback type for this motor, ensuring accurate motion monitoring.
