MDD090A-N-040-N2L-130PL2
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth Indramat MDD090A-N-040-N2L-130PL2 is a motor for digital drive controllers in the MDD Synchronous Motors series. It offers a nominal speed of 4000 rpm and a continuous torque at standstill of 3.7 Nm, with digital servo feedback and a holding brake torque of 11 Nm. The motor features a standard housing, centering diameter of 130 mm, and a shaft with keyway and shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the MDD090A-N-040-N2L-130PL2, a synchronous servo motor in the MDD Synchronous Motors series. The unit is intended for digital drive controllers where it converts commanded current into accurately regulated torque and speed for pick-and-place arms, feeders, and other automated stations. It uses permanent-magnet excitation and suits medium-power axes that demand quick reversal and precise positioning.
The motor’s mechanical profile is defined by a centering diameter of 130 mm, a size 090 stator frame, and the short A length, giving a compact form for tight mounting. At its rated electrical supply the rotor can reach a nominal speed of 4000 min⁻¹; this figure establishes the control loop’s base frequency and marks the continuous duty point. While held at zero rpm it can produce 3.7 Nm of torque indefinitely, maintaining axis preload without overheating. Standard dynamic balancing minimises vibration, and a standard-grade housing shields the windings from airborne contaminants. Power and sensor cores terminate on a moulded Connector, allowing rapid exchange during service.
The motor is fitted with a blocking brake that applies 11.0 Nm when engaged, preventing back-driving on vertical or indexing axes. Cables exit on the Left side, assisting cabinet layouts that group harnesses along a common raceway. Rotor position is returned through digital servo feedback, which the controller uses for commutation and diagnostic checks. A keyway shaft end simplifies coupling to gearboxes, and an integral shaft seal inhibits ingress of coolant or grease. The shaft is provided only on side A, so overall length and reflected inertia stay low.
Frequently Asked Questions about MDD090A-N-040-N2L-130PL2:
Q: What is the continuous torque at standstill for the MDD090A-N-040-N2L-130PL2 motor?
A: This model delivers 3.7 Nm of continuous torque at standstill.
Q: Does the MDD090A-N-040-N2L-130PL2 motor include a holding brake and what is its torque?
A: The MDD090A-N-040-N2L-130PL2 is equipped with a blocking brake that provides a holding brake torque of 11.0 Nm.
Q: What motor feedback type does the MDD090A-N-040-N2L-130PL2 use?
A: The motor uses digital servo feedback (DSF) for accurate position detection.
Q: What is the nominal speed of the MDD090A-N-040-N2L-130PL2 motor?
A: The nominal speed for this MDD synchronous motor is 4000 min⁻¹ .
Q: What shaft configuration is included on the MDD090A-N-040-N2L-130PL2 motor?
A: The shaft type is keyway, featuring a standard shaft seal for added protection.
