MDD090A-N-030-N2M-130PL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
28 Seconds
The Bosch Rexroth Indramat MDD090A-N-030-N2M-130PL2 is a motor for digital drive controllers from the MDD Synchronous Motors series, featuring a continuous torque at standstill of 3.7 Nm and a nominal speed of 3000 per minute. This motor comes with a 130 mm centering diameter, an integrated multiturn absolute encoder, and a holding brake torque of 11.0 Nm. It also features digital servo feedback, a left connection direction, and a keyway shaft type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090A-N-030-N2M-130PL2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts drive current into controlled mechanical rotation for positioning and velocity tasks in automated machinery. The unit combines the series' electromagnetic layout with a standard housing and standard rotor balancing so it can be mounted directly on machine frames without additional vibration tuning. Its synchronous design supports repeatable motion on feed axes, indexing tables, and other closed-loop machine functions.
Mechanical interface details start with a centering diameter of 130 mm, which sets the reference fit against the mounting pilot. When energized, the rotor can deliver a continuous standstill torque of 3.7 Nm, enabling steady load holding at zero speed. Speed regulation extends to a nominal value of 3000 rpm, matching digital drive systems used for rapid positioning and steady running speeds. Position data comes from an integrated multi-turn absolute encoder, which preserves axis position information through power cycles. Power and feedback cables terminate through a connector, and the connection direction is on the left side of the housing. This layout keeps the electrical interface compact and supports direct installation in machine assemblies.
For static load retention during shutdowns, a blocking brake produces 11.0 Nm of holding torque and is released automatically by the drive. Servo loop resolution is enhanced by digital servo feedback (DSF), allowing high-gain current and velocity control during motion. The rotor shaft uses a keyway to transmit torque to pulleys or couplings, and the output end includes a shaft seal that limits lubricant migration. The brake and sealed output end are useful on compact axes that must hold position during shutdowns.
Frequently Asked Questions about MDD090A-N-030-N2M-130PL2:
Q: What type of encoder does the MDD090A-N-030-N2M-130PL2 motor use?
A: This motor features an integrated multiturn absolute encoder for position feedback.
Q: What is the continuous torque at standstill for the MDD090A-N-030-N2M-130PL2?
A: The MDD090A-N-030-N2M-130PL2 provides a continuous torque of 3.7 Nm at standstill.
Q: Does the MDD090A-N-030-N2M-130PL2 have a holding brake and what is its torque?
A: A blocking brake with a holding torque of 11.0 Nm is included on this motor.
Q: What type of shaft and sealing does the MDD090A-N-030-N2M-130PL2 motor have?
A: The shaft on this model has a keyway and is equipped with a shaft seal.
Q: What is the nominal speed rating for the MDD090A-N-030-N2M-130PL2?
A: The nominal speed of the MDD090A-N-030-N2M-130PL2 is 3000 min⁻¹.
