MDD090A-N-030-N2M-130PB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
15 Seconds
The Bosch Rexroth Indramat MDD090A-N-030-N2M-130PB0 is a synchronous motor for digital drive controllers and is part of the MDD Synchronous Motors series. It features a nominal speed of 3000 rpm, a continuous torque at standstill of 3.7 Nm, and includes a keyway shaft type with a shaft seal. The motor is equipped with an integrated multiturn absolute encoder and digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090A-N-030-N2M-130PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded current into precise rotary motion for positioning and velocity loops in automated machinery. This operating role makes it suitable for axes that must hold stable speed and repeatable position under changing load conditions. The A-length housing, 090 frame size, and standard balancing help the unit fit compact axes while maintaining smooth rotation. A shaft seal at the output end helps block fluid ingress, and the standard housing supports use in general-purpose industrial environments.
At standstill the rotor can deliver 3.7 Nm of continuous torque, which indicates its steady holding capability before thermal limits are reached. Radial locating accuracy is aided by the 130 mm centering diameter that seats the flange on precision machine frames. A secure flange fit helps the motor align with couplings and driven assemblies during installation. All electrical terminations exit on side B, helping keep cable routing clear of the driven load. A detachable connector interface allows installation without re-terminating fixed control cables. The front shaft end is prepared for pulleys or gearsets, and the motor has no rear shaft, which helps reduce overhung mass.
Position data come from the integrated multiturn absolute encoder, allowing the controller to recover the exact angle after power loss without a homing move. This feedback arrangement supports immediate startup behavior when the axis must resume from a known position. The motor is supplied without a blocking brake, so holding during downtime must be provided by the drive or by an external clamp. Commutation and diagnostics use digital servo feedback signals that travel through the hybrid cable. Rated speed reaches 3000 rpm, matching common 50/60 Hz mechanical transmission ratios. The output shaft uses a keyway to help resist slip during cyclic load reversals.
Frequently Asked Questions about MDD090A-N-030-N2M-130PB0:
Q: What type of shaft does the MDD090A-N-030-N2M-130PB0 use?
A: This motor uses a keyway shaft type for secure mechanical coupling.
Q: What type of encoder is included with the MDD090A-N-030-N2M-130PB0?
A: An integrated multiturn absolute encoder is provided for position feedback.
Q: Where is the electrical connection located on the MDD090A-N-030-N2M-130PB0?
A: The connection on this motor is made via a connector located on Side B.
Q: What is the continuous torque at standstill for the MDD090A-N-030-N2M-130PB0?
A: The motor delivers a continuous torque of 3.7 Nm at standstill.
Q: Does the MDD090A-N-030-N2M-130PB0 have a holding brake?
A: This model is manufactured without a blocking brake.
