Product Description:

The MDD090A-N-030-N2M-130GR1 synchronous motor is built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It serves as the electromechanical actuator in digitally controlled axes, converting regulated current from the drive into repeatable rotary motion. In automated equipment, the motor positions slides, heads, or spindles where high cycle accuracy and a compact footprint are important.

The front flange uses a 130 mm centering pilot, allowing the housing to seat concentrically in existing 090-frame mounts without shims. During static clamping or low-speed holding, it sustains a continuous torque of 3.7 Nm without exceeding winding temperature limits. When the inverter commands full speed, the rotor reaches 3000 min⁻¹, which suits common reduction ratios in printing and material-handling equipment. A spring-applied brake provides 6.5 Nm of resisting torque to hold position when mains power or control voltage is interrupted.

Position data comes from an integrated multiturn absolute encoder, so the axis can restart without external homing after a power cycle. The controller receives high-resolution angle and velocity signals through digital servo feedback for stable loop correction. Mechanical output is delivered through a plain shaft, and a fitted shaft seal helps limit contamination at the housing exit. Standard dynamic balancing, a right-side power connector, and a single-ended shaft support smooth running and orderly cable routing.

Wake Industrial stocks this motor for immediate dispatch. Same-day shipping is available when orders are released before the daily cutoff. Quotations remain valid for 30 days, and the chat tool on the website can answer questions about fault codes or type details.