MDD090A-N-030-N2M-130GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
41 Seconds
The Bosch Rexroth Indramat MDD090A-N-030-N2M-130GA2 is a motor from the MDD Synchronous Motors series with a nominal speed of 3000 min⁻¹ and a continuous torque at standstill of 3.7 Nm. It features an integrated multiturn absolute encoder and digital servo feedback, and includes a holding brake with a torque of 11.0 Nm. This motor has a plain shaft with shaft seal and a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090A-N-030-N2M-130GA2 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for digital drive controllers, it translates commanded current into controlled rotary motion for indexing tables, packaging axes, gantries, feeders, and robotics where precise positioning and repeatable cycle times are required. This type of motor is used where closed-loop motion must remain stable during starts, stops, and direction changes. Its synchronous design supports accurate speed control and repeatable positioning in automated machinery.
At standstill, the motor can sustain a continuous torque of 3.7 Nm without exceeding its allowable temperature limits, and during operation it reaches a nominal speed of 3000 rpm. The centering flange measures 130 mm, providing a locating surface that aligns the 090 frame size to gearboxes or machine frames. A holding brake in the rear housing delivers 11.0 Nm of static torque to secure the load when power is removed. Power and feedback plugs are located on Side A, which can simplify cable routing when the shaft points toward the machine. Standard balancing helps reduce vibration during rotation, and the sealed housing helps protect internal components from contaminants encountered in industrial environments.
Position information is supplied through digital servo feedback combined with an integrated multiturn absolute encoder, enabling the drive to recover axis position after power cycles. The output shaft is a plain shaft, and a shaft seal is fitted to block coolant or lubricant from migrating along the journal. The motor uses a single-ended shaft arrangement with the shaft on side A only. Electrical connection is made through circular connectors rather than screw terminals, which keeps the interface consistent with standard motor cable assemblies. The housing layout also matches the mounting pattern used across the series, so the motor fits common machine interfaces while maintaining protection against oil mist and fine dust.
Frequently Asked Questions about MDD090A-N-030-N2M-130GA2:
Q: What type of encoder is integrated in the MDD090A-N-030-N2M-130GA2 motor?
A: The MDD090A-N-030-N2M-130GA2 motor comes with an integrated multiturn absolute encoder.
Q: What is the continuous torque at standstill for the MDD090A-N-030-N2M-130GA2?
A: This motor provides a continuous torque of 3.7 Nm when at standstill.
Q: What kind of shaft and shaft protection does the MDD090A-N-030-N2M-130GA2 have?
A: The shaft features a plain design and includes a shaft seal for protection against contaminants.
Q: Where is the electrical connection located on the MDD090A-N-030-N2M-130GA2, and what type is it?
A: The connection for this motor is located on Side A and utilizes a connector style interface.
Q: Does the MDD090A-N-030-N2M-130GA2 have a holding brake, and what is its torque?
A: A blocking brake with a holding torque of 11.0 Nm is included on this motor.
