MDD090A-N-030-N2M-110PR2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
5 Seconds
The Bosch Rexroth Indramat MDD090A-N-030-N2M-110PR2 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It provides a continuous torque of 3.7 Nm at standstill and has a nominal speed of 3000 revolutions per minute. This motor features an integrated multiturn absolute encoder, digital servo feedback, and a holding brake torque of 11.0 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090A-N-030-N2M-110PR2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. It is supplied as a motor for digital drive controllers, where it converts commanded currents into precise rotary motion for industrial automation tasks such as indexing tables, feeders, and gantry axes. The motor is intended for closed-loop operation in systems that require accurate speed regulation and repeatable positioning. The design integrates position feedback and mechanical holding capability so the drive can regulate speed during production cycles and hold the load when power is interrupted. This combination makes it suitable for axes that must stop accurately, restart smoothly, and maintain controlled motion across repeating machine cycles.
A nominal speed of 3000 rpm lets machine builders match the motor to standardized 50 Hz or 60 Hz drive arrangements, while a continuous standstill torque of 3.7 Nm sustains force at zero speed without additional cooling. The blocking brake develops 11.0 Nm of torque to hold vertical or offset loads after shutdown. Mounting concentricity is ensured by a 110 mm centering diameter, and power and feedback plugs exit on the right side to keep harnesses clear of moving parts. A shaft seal prevents lubricant loss and helps guard against airborne contaminants during normal operation.
Electrical terminations use a connector interface for the power and feedback leads. The drive shaft is machined with a keyway so couplings can transmit torque without slippage, and the shaft end is on side A to help keep the overall length shorter. Position data comes from an integrated multi-turn absolute encoder that provides digital servo feedback to the controller for closed-loop operation. The A length code keeps rotor mass lower, while standard balancing supports smooth rotation during normal industrial use. The motor also uses a standard cast housing in the 090 frame size, providing a rigid outer structure for machine mounting.
Frequently Asked Questions about MDD090A-N-030-N2M-110PR2:
Q: Does the MDD090A-N-030-N2M-110PR2 motor have a holding brake and what is its torque?
A: The MDD090A-N-030-N2M-110PR2 motor includes a blocking brake with a holding torque of 11.0 Nm.
Q: What type of encoder is built into the MDD090A-N-030-N2M-110PR2?
A: This model is equipped with an integrated multiturn absolute encoder for position feedback.
Q: What kind of shaft design does the MDD090A-N-030-N2M-110PR2 offer?
A: The shaft on this motor features a keyway design and includes a shaft seal for protection.
Q: What is the continuous standstill torque of the MDD090A-N-030-N2M-110PR2?
A: The continuous torque at standstill for this motor is specified as 3.7 Nm.
Q: Which direction is the electrical connection for the MDD090A-N-030-N2M-110PR2, and what type of connector does it use?
A: The connection direction for this model is oriented to the right and uses a connector.
