MDD090A-N-030-N2M-110GR0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
19 Seconds
The Bosch Rexroth Indramat MDD090A-N-030-N2M-110GR0 is part of the MDD Synchronous Motors series and is designed as a motor for digital drive controllers. It provides a continuous torque at standstill of 3.7 Nm, features a nominal speed of 3000 min⁻¹, and includes an integrated multiturn absolute encoder with digital servo feedback. The motor is constructed with a 110 mm centering diameter, a plain shaft with shaft seal, and uses a connector for right-side connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090A-N-030-N2M-110GR0 synchronous servo motor is manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts controller commands into precise rotary motion for automated positioning, conveying, or tooling axes in industrial machinery. Its closed-loop servo operation supports fast response during start, stop, and reversing moves, which helps maintain repeatable motion in indexing tables, feed axes, and transfer systems. This operating behavior suits applications that need consistent speed regulation and accurate position tracking during frequent motion changes.
At standstill, the motor supplies 3.7 Nm of continuous torque, providing adequate margin for light-duty feed or indexing axes that require stable holding force. Its rated speed is 3000 rpm, fitting common transport and spindle speed bands in compact automated equipment. Position data are provided by an integrated multi-turn absolute encoder, and the drive receives real-time information through digital servo feedback (DSF). All cabling exits on the right side through a sealed connector, so both power and signal lines can be routed along one machine side. The rotor uses standard balancing, and the compact 090 frame with A length helps keep inertia and installation depth low while preserving responsive motion.
The centering pilot is 110 mm, allowing direct seating on matching flange faces and helping maintain accurate alignment during mounting. A plain shaft fitted with a shaft seal supports coupling to the driven load while helping keep contaminants away from internal bearing areas. Because the motor is supplied without a blocking brake, an external holding device or commanded drive torque is needed to secure the axis when power is removed. A standard aluminum housing encloses the windings and provides a compact enclosure for general machine installations. The shaft end follows the standard pattern with no extension on side B, which keeps the rear of the motor clear for straightforward placement near machine structures.
Frequently Asked Questions about MDD090A-N-030-N2M-110GR0:
Q: What type of encoder is used in the MDD090A-N-030-N2M-110GR0 motor?
A: The MDD090A-N-030-N2M-110GR0 is equipped with an integrated multiturn absolute encoder for precise position tracking.
Q: What is the continuous standstill torque output of the MDD090A-N-030-N2M-110GR0?
A: This model delivers a continuous torque of 3.7 Nm at standstill, suitable for various precision drive tasks.
Q: What is the centering diameter of the MDD090A-N-030-N2M-110GR0 motor?
A: The centering diameter for this motor is 110 mm, ensuring compatibility with standard mounting setups.
Q: How is the electrical connection configured on the MDD090A-N-030-N2M-110GR0?
A: The connection direction for this motor is right, and it uses a connector for electrical links.
Q: Does the MDD090A-N-030-N2M-110GR0 motor include a holding brake?
A: This model does not come with a blocking brake, so holding functionality must be managed externally if needed.
