MDD090A-N-030-N2M-110GB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
35 Seconds
The Bosch Rexroth Indramat MDD090A-N-030-N2M-110GB0 is a motor for digital drive controllers in the MDD Synchronous Motors series, featuring a nominal speed of 3000 rpm and a continuous torque at standstill of 3.7 Nm. It comes with a standard plain shaft, 110 mm centering diameter, and an integrated multiturn absolute encoder for digital servo feedback. The motor uses a connector for connection on side B and includes a shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the MDD090A-N-030-N2M-110GB0, an AC synchronous motor in the MDD Synchronous Motors series. Intended for use with digital drive controllers, the unit supplies controlled torque and speed for feed axes, pick-and-place arms, and similar automation equipment. Its size 090 and length code A give it a short body that fits compact machine frames where installation space is limited. This layout is useful on machines where the motor must sit close to linear guides, protective covers, or transfer tooling. As a synchronous servo motor, it supports repeatable motion, stable low-speed control, and fast response to changing command values.
The standstill torque is 3.7 Nm, allowing the motor to support continuous load at zero speed without excessive heating. A centering diameter of 110 mm helps position the housing accurately on matching flanges or gearbox adapters, which supports consistent shaft alignment. Under rated excitation, the rotor reaches 3000 rpm, a speed that fits many handling, packaging, and printing axes. Power and feedback cables leave on side B, and the sealed connector interface simplifies installation by avoiding fixed cable terminations inside the machine enclosure. That cable direction can help when harnesses must be routed away from moving elements or narrow access doors.
Position data is provided through digital servo feedback from the integrated multi-turn absolute encoder, so the drive can restore shaft position after power returns without a homing cycle. The feedback system also lets the controller monitor rotor angle continuously for precise commutation and steady speed regulation. The motor is supplied without a blocking brake, so parked loads must be held by the drive or by external mechanical means. A plain shaft with a fitted shaft seal supports direct coupling to clamp hubs or bellows couplings while helping limit lubricant migration. Because the shaft is plain rather than keyed, torque transfer depends on the selected coupling and its clamping method.
Frequently Asked Questions about MDD090A-N-030-N2M-110GB0:
Q: What type of encoder is included in the MDD090A-N-030-N2M-110GB0 motor?
A: The MDD090A-N-030-N2M-110GB0 has an integrated multiturn absolute encoder for accurate position tracking.
Q: What is the continuous standstill torque of the MDD090A-N-030-N2M-110GB0?
A: This model delivers a continuous torque of 3.7 Nm at standstill.
Q: What connection type does the MDD090A-N-030-N2M-110GB0 motor use?
A: The MDD090A-N-030-N2M-110GB0 uses a connector for its electrical interface.
Q: Does the MDD090A-N-030-N2M-110GB0 motor include a shaft seal?
A: This motor is equipped with a shaft seal to help protect against dust and contaminants.
Q: Is a holding brake included with the MDD090A-N-030-N2M-110GB0 motor?
A: The MDD090A-N-030-N2M-110GB0 does not come with a blocking brake.
