Product Description:

The MDD090A-N-030-N2L-130PL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor intended for digital drive controllers, it converts commanded current into mechanical rotation for automated axes, packaging lines, and material handling stations. The unit operates in closed-loop drive systems where precise speed regulation and rapid torque response are required for consistent process quality. This allows the motor to support repeatable positioning, controlled acceleration, and responsive speed changes during automated cycles.

At its rated operating point, the motor reaches a nominal speed of 3000 rpm, enabling direct coupling to gearless loads that demand high rotational velocity. A continuous standstill torque of 3.7 Nm can be maintained indefinitely when motion is halted and force must still be exerted. The integrated blocking brake supplies up to 11.0 Nm of static holding torque, so vertical or suspended loads remain secure during power loss. Mounting repeatability is aided by a 130 mm centering diameter that aligns the flange within standard machine frames. Electrical and feedback leads exit on the left side, which helps guide cable routing inside compact enclosures.

Position data is relayed through digital servo feedback, allowing the drive electronics to correct velocity and angle with high resolution. The motor has a size of 090, and the A-length code keeps overall depth minimal for tight axis stacks. Torque is transmitted through a keyed shaft with a keyway to help prevent slip under oscillating loads. A durable shaft seal surrounds the output journal to limit dust and coolant ingress. Standard balancing, a molded connector interface, and a universal housing geometry support stable operation and straightforward wiring in compact machine layouts.