MDD090A-N-030-N2L-110PL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD090A-N-030-N2L-110PL2 is part of the MDD Synchronous Motors series and is designed as a motor for digital drive controllers. This motor features a nominal speed of 3000 rpm, a continuous torque at standstill of 3.7 Nm, and uses digital servo feedback. It comes with a blocking brake with 11.0 Nm holding brake torque and has a centering diameter of 110 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090A-N-030-N2L-110PL2 synchronous servo motor is produced within the MDD Synchronous Motors series. It is a compact rotating actuator intended for digital drive controllers, providing accurate velocity and position control in assembly lines, packaging machines, and similar automated equipment. By converting electrical energy into tightly synchronized mechanical motion, the unit supports repeatable cycles, short settling times, and stable axis behavior during frequent starts and stops. In servo systems, this helps maintain consistent motion profiles during indexing, positioning, and repeated cycle changes without requiring a large motor envelope.
At rated electrical frequency, the motor reaches a nominal speed of 3000 rpm and maintains a continuous standstill torque of 3.7 Nm, which supports holding force during closed-loop positioning. The integrated digital servo feedback (DSF) sends rotor data to the drive for precise speed and position correction during operation. A blocking brake is included and provides 11.0 Nm of static torque to hold vertical or suspended loads when power is removed. Torque is transmitted through a keyway shaft, and the single connector keeps the electrical interface compact. Frame size 090, standard dynamic balancing, and a standard housing support use on mid-range axes with stable running characteristics.
Mechanical integration uses a centering pilot of 110 mm for flange alignment, and all electrical connections exit through a left-side cable exit to simplify routing in tight cabinets. The shortest build, identified by length code A, reduces the installation footprint when space is limited. A standard single-ended shaft is supplied, and a shaft seal helps prevent lubricant migration into the motor interior. This arrangement supports enclosed mounting positions where cleanliness, compact cable routing, and reliable shaft protection are important.
Frequently Asked Questions about MDD090A-N-030-N2L-110PL2:
Q: What type of feedback does the MDD090A-N-030-N2L-110PL2 motor use?
A: The MDD090A-N-030-N2L-110PL2 motor is equipped with digital servo feedback (DSF) for precise position sensing.
Q: Does the MDD090A-N-030-N2L-110PL2 include a holding brake and what is its torque?
A: This motor includes a blocking brake with a holding torque of 11.0 Nm for secure position retention when not powered.
Q: What is the nominal speed of the MDD090A-N-030-N2L-110PL2 motor?
A: The nominal speed of the MDD090A-N-030-N2L-110PL2 motor is 3000 min⁻¹, which supports moderate to high-speed industrial applications.
Q: What is the configuration of the shaft on the MDD090A-N-030-N2L-110PL2 motor?
A: A shaft with keyway and shaft seal is featured on this model, providing reliable torque transfer and sealing against contaminants.
Q: What is the continuous torque at standstill for the MDD090A-N-030-N2L-110PL2?
A: The continuous torque at standstill for this model is 3.7 Nm, ensuring stable torque during stationary operation.
