MDD090A-N-020-N2M-110PB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911253420
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
8 Seconds
The Bosch Rexroth Indramat MDD090A-N-020-N2M-110PB1 is a synchronous motor for digital drive controllers and is part of the MDD Synchronous Motors series. It features a nominal speed of 2000 min⁻¹ and a continuous standstill torque of 3.7 Nm, with a standard shaft that includes a keyway and shaft seal. This motor is equipped with an integrated multiturn absolute encoder and comes with a blocking brake and a holding brake torque of 6.5 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090A-N-020-N2M-110PB1 synchronous servo motor is produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it supplies controlled rotary motion for tooling tables, pick-and-place modules, and other industrial axes that require coordinated positioning. The frame uses a compact A length code, which keeps the housing relatively short for machines with limited installation space while still supporting the quick torque response expected from a permanent-magnet servo motor. That format is useful in multi-axis equipment where available depth around the motor is restricted by adjacent machine parts.
Mechanical alignment is simplified by a centering diameter of 110 mm, and the rotor is finished to a standard balancing quality so additional balancing work is not normally required during installation. At standstill, the motor delivers 3.7 Nm of continuous torque, while stable operation at its nominal speed of 2000 rpm supports consistent throughput in medium-inertia loads. Position data are supplied by an integrated multi-turn absolute encoder, allowing the controller to retain position information after power cycles. A blocking brake rated at 6.5 Nm secures the shaft during downtime, and the housing includes an internal shaft seal to help isolate lubricants and airborne contamination from the motor interior.
Electrical and feedback terminations exit on side B and are routed through a sealed connector, which helps keep cable routing orderly when the motor is mounted close to nearby machine sections. Signal integrity between the encoder and the drive is maintained by digital servo feedback, supporting precise velocity and position control in closed-loop operation. The ground-hardened shaft uses a keyway for positive torque transmission, and the motor has no second shaft extension at the rear. This layout leaves the back of the motor compact and avoids unnecessary protrusion behind the housing. That can be useful where couplings, guards, and cable runs share the same machine zone.
Frequently Asked Questions about MDD090A-N-020-N2M-110PB1:
Q: What type of encoder is used in the MDD090A-N-020-N2M-110PB1 motor?
A: The MDD090A-N-020-N2M-110PB1 features an integrated multiturn absolute encoder for high-precision position feedback.
Q: What is the continuous torque at standstill for the MDD090A-N-020-N2M-110PB1?
A: This motor provides a continuous torque of 3.7 Nm at standstill for stable motion control.
Q: Does the MDD090A-N-020-N2M-110PB1 motor have a holding brake?
A: It comes with a holding brake that offers a torque rating of 6.5 Nm.
Q: What type and direction of connection is provided on the MDD090A-N-020-N2M-110PB1 motor?
A: A connector is used for the electrical connection on this model, with the connection positioned at Side B.
Q: What are the shaft characteristics of the MDD090A-N-020-N2M-110PB1?
A: This motor is equipped with a shaft featuring a keyway and a shaft seal for reliable mechanical coupling and protection.
