Product Description:

The MDD071C-N-060-N2T-095PB0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into mechanical rotation that positions or drives automated machine axes. This type of motor is suited to closed-loop applications that need repeatable positioning, steady speed control, and fast response to changing load conditions. Its compact frame and torque density allow it to work with modular Rexroth drives in packaging lines, handling robots, and material-processing equipment. The motor can therefore serve feed axes, transfer units, and other automated mechanisms that rely on precise rotary motion.

At standstill, the motor can deliver a continuous torque of 6.6 Nm, which is the sustained load it can hold without exceeding rated thermal limits. During motion, the rotor reaches a nominal speed of 6000 rpm, giving a wide dynamic range for rapid indexing moves. Mechanical fit uses a centering diameter of 95 mm, and the standard housing with size code 071 keeps the overall envelope consistent for this frame. The shaft uses a keyway profile to transmit torque without slip. Feedback signals are returned through digital servo feedback so the controller can maintain accurate position and speed loops.

Electrical and sensor connections exit on Side B of the stator and terminate in a sealed connector, which helps keep cable routing compact inside the machine. An integrated multiturn absolute encoder inside the motor stores position across up to 4,096 revolutions, reducing the need for homing after power loss. The motor is supplied without a blocking brake, so external holding devices are required when power-off load retention is needed. A shaft seal protects the internal bearings from coolant or oil ingress, and the C length code gives the motor a moderate overall depth. The shaft is provided on the drive side only, leaving the opposite end free of output features.