Product Description:

The MDD071C-N-060-N2T-095PA2 is a brushless AC servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts regulated current into precise torque and speed for automated handling, packaging, and robotics equipment. The unit’s construction supports high rotational velocity while maintaining tight positional accuracy, enabling machine axes to accelerate, decelerate, and hold position under continuous-duty cycles commonly encountered in industrial automation cells.

At a nominal speed of 6000 rpm, the rotor runs in step with the commanded electrical frequency, letting the controller use full bus voltage for rapid indexing. The motor supplies 6.6 Nm of continuous standstill torque, so it can support fixtures or tables without overheating while idle. A centering diameter of 95 mm registers the flange precisely, reducing radial misalignment during installation. Electrical terminations use a connector positioned on side A, simplifying cable routing because power, feedback, and brake wires exit in a single direction. Feedback arrives through digital servo feedback (DSF), enabling fine current, velocity, and position regulation within the drive.

The motor is supplied with a blocking brake that applies 6.5 Nm of static torque to secure vertical or suspended loads whenever the controller is disabled. Torque reaches the driven element through a shaft cut with a keyway, and a shaft seal helps keep contaminants out of the bearing chamber. Because the shaft end is standard and lacks a side-B extension, coupling options remain straightforward. Frame size 071 helps limit overall mass, while the integrated multiturn absolute encoder preserves position data across power cycles. Standard balancing reduces vibration, the standard housing supports natural convection, and motor length code C keeps the package short for space-restricted machinery.