Product Description:

The MDD071C-N-060-N2T-095PA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Engineered to work with digital drive controllers, the motor converts three-phase electrical power into controlled mechanical rotation for indexing tables, pick-and-place actuators, and general automation axes. Digital servo feedback sends real-time position data from the encoder to the drive so the control loop can respond quickly to changes in speed and position during operation.

The unit develops a continuous stall torque of 6.6 Nm, allowing stable load support when motion is halted. Under rated excitation it reaches a nominal speed of 6000 rpm, which supports short cycle times in packaging and assembly machinery. Accurate flange alignment is provided by a 95 mm centering diameter that helps limit radial runout at the machine interface. The motor occupies the C length class inside the size 071 frame, giving additional active length while keeping the housing compact. Power and feedback cables exit on side A, and the sealed connector keeps wiring organized where the motor joins the machine. Standard class balancing helps reduce vibration during high-speed operation.

A keyway shaft transfers torque through positive engagement, and a shaft seal helps protect the front bearing from fluids or dust. Position is resolved by an integrated multiturn absolute encoder, allowing the controller to track shaft angle across multiple revolutions without a homing cycle after startup. Mechanical holding during power-off is not provided because the motor is supplied without a blocking brake, so an external holding method is needed when the load must remain fixed at a stop. The motor also uses a standard single-ended shaft arrangement and a connectorized wiring layout, which suit compact automation equipment where clear cable routing and reliable motion control are important.