Product Description:

The MDD071C-N-060-N2T-095GR1 is a synchronous AC servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into precise torque and speed for automated axes in packaging lines, printing machines, and material-handling stations. The motor integrates power and feedback connections, permitting straightforward inclusion in closed-loop motion systems where fast positional updates and compact footprints are critical. It is intended for direct mounting on machinery frames and interfaces electrically with Rexroth or third-party inverters without additional signal conditioning.

In continuous operation, the motor delivers 6.6 Nm of torque at standstill, giving stable holding force for static loads while still allowing quick acceleration. It can reach 6000 rpm, a speed matched to the 060 winding code current density. The built-in blocking brake applies 3.0 Nm of torque to help prevent axis drift during power loss. Position is reported through digital servo feedback (DSF) using an integrated multi-turn absolute encoder, so the drive retains absolute position after power cycling. A 95 mm centering pilot simplifies coaxial mounting and limits runout, and the right-side quarter-turn connector keeps power and feedback cabling clear of moving parts.

With the 071 frame and the extended C length code, the motor balances inertia and thermal mass without enlarging its footprint. It has a plain shaft with a shaft seal, which helps retain lubricant and protect the bearing seat from dust or coolant. Standard balancing supports smooth service at the nominal speed, and the housing uses the series' standard ribs so no forced airflow is required. Only the side A shaft end is present, allowing the rear face to sit flush against machine panels.