MDD071C-N-060-N2T-095GR0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071C-N-060-N2T-095GR0 is a synchronous motor in the MDD Synchronous Motors series. It features a nominal speed of 6000 RPM, a continuous torque at standstill of 6.6 Nm, and uses a plain shaft with a 95 mm centering diameter. The motor includes a digital servo feedback system, an integrated multiturn absolute encoder, and a right-connectable connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-060-N2T-095GR0 is a servo motor built by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts controlled electrical power into rotational motion that can be synchronized closely with CNC or PLC commands in automated machinery. The unit uses the 071 frame size with the C length code, giving a compact form for mid-range axes such as pick-and-place heads, indexing tables, or light machining spindles. This arrangement suits applications that need accurate positioning, repeatable speed control, and stable response during frequent start and stop cycles.
A centering diameter of 95 mm aligns the housing on the mounting face, while standard dynamic balancing helps limit vibration during operation. The motor delivers 6.6 Nm of continuous standstill torque, allowing it to support static loads without excessive thermal stress until motion resumes. During operation, it can reach a nominal speed of 6000 rpm, supporting short cycle times when paired with appropriate gearing. Position and velocity loops are closed through digital servo feedback, and an integrated multiturn absolute encoder reports rotor angle over multiple revolutions so reference travel after power loss is not required. The single connector on the right side carries power, signal, and protective earth, which helps keep cable routing compact and organized.
The drive end uses a plain shaft and a factory-fitted shaft seal to help prevent contaminants or lubricant from reaching internal components. Because the design is supplied without a blocking brake, any required holding function must be provided by external mechanics or by maintained drive torque. The standard shaft end on side A, together with the absence of a side B extension, helps reduce overhang loads and supports responsive acceleration. The motor uses connector-based termination, which keeps the electrical interface compact and supports straightforward installation in enclosed machine layouts.
Frequently Asked Questions about MDD071C-N-060-N2T-095GR0:
Q: What type of encoder does the MDD071C-N-060-N2T-095GR0 motor include?
A: The MDD071C-N-060-N2T-095GR0 features an integrated multiturn absolute encoder for precise position tracking.
Q: What is the continuous torque at standstill for the MDD071C-N-060-N2T-095GR0?
A: This model provides a continuous torque at standstill of 6.6 Nm.
Q: What shaft configuration is available on the MDD071C-N-060-N2T-095GR0?
A: The shaft type for this motor is a plain shaft with a shaft seal for additional protection.
Q: How is the motor electrically connected in the MDD071C-N-060-N2T-095GR0?
A: The connection direction for this Bosch Rexroth Indramat motor is to the right, using a connector type interface.
Q: Does the MDD071C-N-060-N2T-095GR0 come with a holding brake?
A: This model does not include a blocking brake.
