Product Description:

The MDD071C-N-060-N2T-095GL2 is a servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. It is intended for digital drive controllers, giving closed-loop positioning and speed control in automated machinery. An internal blocking brake holds the shaft when power is removed, and the standard housing with standard balancing suits general-purpose axes in packaging, printing, and handling equipment. That arrangement lets the drive manage torque, speed, and holding functions in one compact motor package.

The motor can deliver a continuous standstill torque of 6.6 Nm, providing sustained force for static loads without overheating. During motion, the rotor reaches a nominal speed of 6000 rpm, fitting applications that require high feed or spindle rates. Accurate mounting is aided by a centering diameter of 95 mm, which helps the motor seat correctly on the machine interface. Cabling is routed on the left side through a single connector, which helps keep the connection area compact. A blocking brake rated at 6.5 Nm supplies holding force for vertical axes or applications that must remain in position during power loss. Standard rotor balancing helps reduce vibration during normal operation.

The integrated position sensor uses an integrated multi-turn absolute encoder, which reports both absolute angle and multiple shaft revolutions for startup without a homing move. Feedback signals use Digital servo feedback (DSF), so the motor works with compatible Indramat drives that process high-resolution position data. This feedback arrangement supports precise commutation and stable control as load conditions change. The frame uses size code 071 and a C-length stack, giving a mid-range mechanical envelope for this motor family. A plain shaft and a dedicated shaft seal help keep lubricant in place and reduce dust entry at the output end. The design also uses a single shaft end, which keeps the drive-side geometry simple for coupling to external machine elements.