MDD071C-N-060-N2T-095GB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911265692
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
11 Seconds
The Bosch Rexroth Indramat MDD071C-N-060-N2T-095GB2 is a motor from the MDD Synchronous Motors series, featuring an integrated multiturn absolute encoder and digital servo feedback. It provides a continuous torque at standstill of 6.6 Nm, holds with a blocking brake rated at 6.5 Nm, and is equipped with a plain shaft with shaft seal and a 95 mm centering diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-060-N2T-095GB2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it supplies rotational power to axes that require rapid speed changes and precise positioning in automated machinery. The model pairs with Indramat drive controllers where feedback loops require accurate torque control, making it suitable for pick-and-place tables, packaging spindles, and other industrial motion tasks. In closed-loop operation, the motor responds quickly to changing command values so the connected axis can maintain stable motion during indexing, speed regulation, and repeated positioning cycles.
The motor delivers a continuous standstill torque of 6.6 Nm, allowing the axis to hold load without overheating during static clamping or vertical suspension. During rotation, the windings support a nominal speed of 6000 rpm, so gearbox ratios can be selected for higher process throughput. A blocking brake integrated on the non-drive end provides 6.5 Nm of mechanical holding force when power is removed, helping secure suspended loads and parked axes. Accurate centering on mounting flanges is aided by the 95 mm locating diameter, and cabling exits toward side B, which can simplify cable routing when several motors are installed close together in a machine.
Position data is produced by an integrated multiturn absolute encoder, and that signal is routed back to the controller over digital servo feedback (DSF) channels, allowing position information to remain available after power cycles. The rotor and stator assembly use motor length code C, which indicates the longer housing within the 071 frame and supports the motor's torque capacity in that size. A plain shaft with a shaft seal helps keep lubricant inside while limiting the entry of coolant spray and debris during operation. The motor uses a single plug-in connector, and the housing has standard dynamic balancing to help reduce vibration transfer to couplings, gearboxes, and nearby machine structures.
Frequently Asked Questions about MDD071C-N-060-N2T-095GB2:
Q: What type of encoder is included with the MDD071C-N-060-N2T-095GB2 motor?
A: This model features an integrated multiturn absolute encoder.
Q: What is the holding brake torque of the MDD071C-N-060-N2T-095GB2?
A: The holding brake on this motor provides a torque of 6.5 Nm.
Q: What is the nominal speed of the MDD071C-N-060-N2T-095GB2 motor?
A: The MDD071C-N-060-N2T-095GB2 operates at a nominal speed of 6000 min⁻¹.
Q: What is the continuous standstill torque specification for the MDD071C-N-060-N2T-095GB2?
A: This motor offers a continuous torque at standstill of 6.6 Nm.
Q: What kind of shaft and sealing does the MDD071C-N-060-N2T-095GB2 motor use?
A: A plain shaft with a shaft seal is included on this model.
