Product Description:

The MDD071C-N-060-N2T-095GB0 is a permanent-magnet synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is supplied as a motor for digital drive controllers, which means it is intended to be paired with an Indramat drive that regulates stator current in real time. When installed on packaging machines, pick-and-place modules, or indexing tables, the unit converts commanded current vectors into accurately controlled mechanical torque and supports coordinated motion in multi-axis automation cells.

At a standstill, the motor provides a continuous torque of 6.6 Nm, allowing drive clamps or gearboxes to remain motionless without overheating the windings. Once energized to its rated electrical frequency, it reaches a nominal speed of 6000 rpm, supporting short cycle times on high-speed process axes. A centering pilot of 95 mm maintains shaft concentricity and reduces runout when the housing is fastened to a machine flange. All power and feedback conductors exit on side B, which can simplify cable routing when the cabinet is located behind the motor. A molded connector is used instead of loose leads, and it keeps contacts shielded from coolant splash or dust.

Position information is generated by an integrated multi-turn absolute encoder and returned through digital servo feedback, giving the drive controller immediate awareness of rotor position across multiple revolutions. The motor is built without a blocking brake, so applications that require static holding must use an external mechanical lock or maintain drive current. A lip-type shaft seal protects the standard housing against lubricants while the rotor is balanced to the standard grade to limit vibration. Frame length code C in the 071 size family gives the motor moderate inertia, and a plain shaft without a side-B extension simplifies coupling to belt pulleys, rigid hubs, or integral gear stages.