Product Description:

The MDD071C-N-060-N2T-095GA1 is a servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it provides rotary actuation for automated axes in packaging, handling, and processing equipment. Integrated position feedback and a blocking brake let the connected controller manage coordinated speed and torque commands throughout the machine duty cycle. Its compact frame also supports installations where mounting space is limited but accurate axis response is still required.

A centering flange diameter of 95 mm aligns the housing accurately against mating machine plates. Power and feedback leads exit on side A, so cables can be routed from one direction and kept clear of neighboring components. A plain shaft with a shaft seal transmits torque to the coupling while helping prevent oil ingress at the bearing. The motor provides 6.6 Nm of continuous torque at standstill for stable static positioning, and it reaches a nominal speed of 6000 rpm for high-cycle operation. It uses size 071 with length code C, and the housing has the standard form used for this frame.

The blocking brake supplies 3.0 Nm of holding torque, which helps hold vertical axes during power-off stops. Position data comes from an integrated multi-turn absolute encoder, and the drive reads this signal through digital servo feedback for closed-loop motion control without separate transducers. A connector is used for the windings and sensors, and standard balancing helps keep residual vibration low across the speed range. The motor also has a standard housing finish, no side-B shaft extension, and an integral shaft seal for sealed machine installation. This arrangement keeps the motor body compact while combining holding and feedback functions in one unit.