Product Description:

The MDD071C-N-060-N2T-095GA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed as a motor for digital drive controllers, it serves as the primary rotary actuator in automated assembly cells, pick-and-place gantries, and light machining centers that demand accurate speed control and rapid positioning. Its compact frame fits into tight machine layouts and on-machine brackets without limiting dynamic response.

At the mechanical core, the motor can deliver a continuous standstill torque of 6.6 Nm, giving stable holding force without overheating. During motion, it reaches a nominal speed of 6000 rpm, allowing fast indexing when it is paired with an inverter. A centering diameter of 95 mm aligns the stator to common mounting shoulders, and the rotor is balanced to the standard grade to minimize vibration. The frame follows the 071 size code and the C length code, so the active stack length supports the listed torque while keeping overall mass moderate. Power, feedback, and brake conductors exit on side A through a single connector, which simplifies cable routing inside gantry housings. The motor uses a standard housing and a sealed circular connector for service access.

For position reporting, the rotor carries an integrated multi-turn absolute encoder that works with the drive over digital servo feedback, so position is retained after power cycles without homing moves. A molded shaft seal protects the interior against coolant spray and fine dust, while the output uses a plain shaft to mate with backlash-free couplings. The shaft end is supplied in the standard single-ended configuration, leaving no extension on side B. Because the unit is built without a blocking brake, holding torque must be provided by the drive or an external mechanical lock when power is removed.