MDD071C-N-060-N2S-095PR2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071C-N-060-N2S-095PR2 is a motor designed for digital drive controllers as part of the MDD Synchronous Motors series. It has a continuous torque at standstill of 6.6 Nm, a holding brake torque of 6.5 Nm, and a nominal speed of 6000 rpm. The motor features digital servo feedback, a 95 mm centering diameter, and a standard keyway shaft type with shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-060-N2S-095PR2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor intended for digital drive controllers, it converts commanded current from the drive into rotary motion for positioning or speed control in automated machinery. Its mechanical layout, feedback method, and integrated brake support axes that must accelerate quickly, hold position accurately, and respond consistently during repeated motion cycles.
This model uses a centering diameter of 95 mm, allowing direct mounting into compatible motor flanges without extra alignment sleeves. Power and feedback cables exit on the right side, which can simplify routing when the cabinet or cable track is placed along that side of the machine. The round motor interface uses a connector, so leads can be attached without hardwiring. At standstill, the stator can deliver 6.6 Nm of continuous torque, supporting steady holding force during controlled operation. Under reference operating conditions, the rotor reaches a nominal speed of 6000 rpm, which supports high travel rates when paired with ball screws or belt drives. Dynamic balance is graded as standard for general automation service.
A blocking brake rated for 6.5 Nm is installed, so vertical loads can remain stationary during power loss or emergency stops. Position feedback is provided by digital servo feedback, supplying absolute position and commutation data to the drive with single-turn resolution. The shaft is machined with a keyway that matches common couplings for positive torque transfer, and there is a shaft seal that helps protect the front bearing from dust or coolant spray. This arrangement supports stable closed-loop motion while keeping the shaft connection suited to typical industrial mounting hardware.
Frequently Asked Questions about MDD071C-N-060-N2S-095PR2:
Q: What is the continuous standstill torque capability of the MDD071C-N-060-N2S-095PR2 motor?
A: The MDD071C-N-060-N2S-095PR2 has a continuous torque at standstill of 6.6 Nm, enabling sustained performance in demanding applications.
Q: What is the torque rating of the holding brake included with the MDD071C-N-060-N2S-095PR2?
A: This model features a holding brake with a torque of 6.5 Nm, providing secure stoppage during power-off or holding positions.
Q: What type of feedback system does the MDD071C-N-060-N2S-095PR2 motor use?
A: The MDD071C-N-060-N2S-095PR2 is equipped with digital servo feedback (DSF) for precise motor position and speed monitoring.
Q: Where is the connection direction located on the MDD071C-N-060-N2S-095PR2 motor?
A: The connection direction for this motor's connector is on the right side, allowing specific installation layouts in machinery.
Q: What type of shaft and sealing are provided with the MDD071C-N-060-N2S-095PR2 motor?
A: This motor comes with a keyway shaft and a shaft seal, supporting a secure mechanical coupling while keeping out contaminants.
