Product Description:

The MDD071C-N-060-N2S-095PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat for use with digital drive controllers. It belongs to the MDD Synchronous Motors series and serves as a compact rotary actuator that converts commanded current into controlled torque and speed for automated machinery. Built with length code C and a standard housing, the unit is suited for packaging lines, pick-and-place systems, and other motion axes that require repeatable positioning and steady closed-loop response.

Mechanical interface dimensions begin with a centering shoulder of 95 mm, which allows direct mounting to compatible machine frames. During stall conditions, the motor can sustain a continuous torque of 6.6 Nm without exceeding its thermal limits, and it can reach a nominal speed of 6000 rpm for fast positioning tasks. Position and velocity feedback are provided by integrated digital servo feedback, which supplies high-resolution data to the drive for closed-loop regulation. Power and signal conductors exit on the right side, which can simplify cable routing when the motor is installed on gantry or conveyor axes that favor that orientation. Standard dynamic balancing helps keep radial forces low and supports smooth operation at higher shaft speeds.

System connections use connector-style terminals, and the output shaft uses a keyway to transmit torque securely to the driven load. The motor is supplied without a blocking brake, so any holding function during power loss must be provided by the drive or by external mechanical means. A shaft seal helps limit contamination at the motor interface and reduces the chance of lubricant migration toward coupled components. The size code 071 keeps the flange footprint compact, and the single-ended shaft arrangement leaves the rear of the motor unobstructed for installations with limited space. The standard housing releases heat to the surrounding air during operation, which supports reliable use in compact machine assemblies.