Product Description:

The MDD071C-N-060-N2S-095PL0 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts controlled current from a servo amplifier into precise shaft rotation for automated assembly stations, pick-and-place gantries, and high-speed packaging lines. The design pairs compact dimensions with high nominal speed so the axis can maintain tight position loops and repeatable cycle times in multi-axis systems. This arrangement also supports consistent torque response during frequent starts, stops, and short indexing moves.

A continuous torque of 6.6 Nm can be supplied at standstill, giving the axis enough holding force for tensioning devices or static positioning without overheating. The nominal speed rating of 6000 rpm supports high peripheral velocity before field weakening becomes necessary. Accurate positional data reach the drive through integrated digital servo feedback, enabling rapid closed-loop corrections during acceleration and deceleration. Mechanical alignment to gearboxes or adapter plates is simplified by the 95 mm centering diameter, and wiring is routed toward the machine frame because the power and feedback connectors are on the left side of the housing. That cable orientation can also help keep routing clear in compact machine layouts.

The motor has size code 071 and length code C, which keep the overall length reasonable for dense multi-motor layouts. The output shaft uses a keyway and an internal shaft seal, which helps keep lubricants out of the encoder section during operation. Motor cabling attaches through a single industrial connector, and the unit is supplied without a blocking brake, so external holding devices are required when power is removed. The shaft end is provided only on side A, while side B remains closed. The rotor is balanced to a standard grade, and the housing uses a standard external form without added cooling fins.