MDD071C-N-060-N2S-095GR0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071C-N-060-N2S-095GR0 is a motor from the MDD Synchronous Motors series with a nominal speed of 6000 rpm and continuous torque at standstill of 6.6 Nm. It features digital servo feedback, a plain shaft with shaft seal, a centering diameter of 95 mm, and right-facing connector connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-060-N2S-095GR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into repeatable rotary motion for indexing tables, packaging axes, and other automated stations. Its 071 frame size and C motor length give it a compact footprint, which helps the motor fit space-limited machine layouts while still supporting the fast response expected in precision positioning applications. The motor is intended for closed-loop operation, where accurate speed and position control are required throughout repeated production cycles.
The motor mounts through a centering pilot of 95 mm, which helps align the housing with attached gearheads or direct couplings. During continuous standstill, it can deliver 6.6 Nm of torque, allowing the drive to hold a load without exceeding normal thermal limits during stationary operation. Under rated excitation, the rotor reaches 6000 rpm, making it suitable for rapid cycle rates and quick motion sequences when paired with a compatible controller. Position and velocity are returned through digital servo feedback, giving the drive the information needed for commutation and closed-loop regulation. Power and signal conductors terminate at a connector on the right side of the housing, which helps keep cable routing compact where lateral space is limited.
The motor uses standard balancing and a standard housing intended for industrial machine installations. Its output is a plain shaft supplied with a shaft seal, which helps limit the entry of dust and oil at the shaft opening during operation. The design uses a single shaft end on the drive side only, so the opposite end does not require an external coupling arrangement. The unit is supplied without a blocking brake, so any vertical or suspended load must be held by the drive system or by an external mechanical device. This layout keeps the shaft arrangement straightforward for direct connection to the driven machine element.
Frequently Asked Questions about MDD071C-N-060-N2S-095GR0:
Q: What type of feedback does the MDD071C-N-060-N2S-095GR0 motor provide?
A: The MDD071C-N-060-N2S-095GR0 uses digital servo feedback (DSF) for position and speed sensing.
Q: What is the nominal speed rating for the MDD071C-N-060-N2S-095GR0 motor?
A: This motor operates at a nominal speed of 6000 min⁻¹, supporting rapid cyclic applications.
Q: How much continuous torque does the MDD071C-N-060-N2S-095GR0 provide at standstill?
A: The MDD071C-N-060-N2S-095GR0 delivers a continuous torque of 6.6 Nm at standstill.
Q: What shaft design is featured on the MDD071C-N-060-N2S-095GR0 motor?
A: This model includes a plain shaft design and does not provide a shaft end on side B.
Q: Does the MDD071C-N-060-N2S-095GR0 motor have a shaft seal?
A: The shaft of this motor is equipped with a seal, offering added protection against contaminants.
