MDD071C-N-060-N2S-095GL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071C-N-060-N2S-095GL2 is a synchronous motor from the MDD Synchronous Motors series, designed for digital drive controllers and featuring a digital servo feedback system. It has a nominal speed of 6000 revolutions per minute, a continuous torque at standstill of 6.6 Newton-meters, and a centering diameter of 95 millimeters. This motor is equipped with a plain shaft, a shaft seal, and a blocking brake with a holding torque of 6.5 Newton-meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-060-N2S-095GL2 is a brushless AC servo motor produced by Bosch Rexroth Indramat and delivered as part of the MDD Synchronous Motors series. The unit is designed for use with digital drive controllers and supplies precisely regulated torque and speed to rotary axes in automated assembly, packaging, and material-handling stations. Its brushless design supports responsive closed-loop motion, and the motor is suited to applications that need stable acceleration, repeatable positioning, and consistent speed regulation through changing loads.
The motor mounts to machinery with a centering pilot of 95 mm, a diameter that establishes concentric alignment between the stator housing and the machine frame. Its continuous stall capability is rated at 6.6 Nm, which is the torque it can produce continuously without exceeding its thermal limit under the stated operating conditions. A maximum speed of 6000 rpm permits rapid cycle operation when the drive issues higher-frequency commands and when the application requires short move times. Electrical and feedback connectors are located on the left side, which can simplify cable routing in layouts that approach the motor from that direction. This is the Left connection direction. The frame class is coded as 071, which corresponds to the motor size used for compatible mounting parts and related mechanical interfaces.
For holding functions, the integrated brake supplies 6.5 Nm of static torque, allowing vertical or indexing loads to remain fixed when the drive is disabled. This arrangement is useful when the axis must remain stationary during power-off conditions. Position information returns to the controller through digital servo feedback, so encoder signals stay synchronized with commanded motion for accurate regulation of speed and position. A factory-installed shaft seal helps block coolant splash and fine dust from entering the bearing cavity, which supports bearing protection during continuous-duty operation. The rotor uses Standard dynamic balancing to reduce residual vibration and support smooth running across the motor's operating range.
Frequently Asked Questions about MDD071C-N-060-N2S-095GL2:
Q: Does the MDD071C-N-060-N2S-095GL2 motor come with a holding brake?
A: Yes, the MDD071C-N-060-N2S-095GL2 motor is equipped with a blocking brake that provides a holding torque of 6.5 Nm.
Q: What type of motor feedback does the MDD071C-N-060-N2S-095GL2 use?
A: This model supports digital servo feedback (DSF) for precise position control.
Q: What is the nominal speed of the MDD071C-N-060-N2S-095GL2 motor?
A: The nominal speed rating for this motor is 6000 min⁻¹, enabling high-speed operations.
Q: What shaft design and sealing features are present on the MDD071C-N-060-N2S-095GL2?
A: The shaft type is a plain shaft and includes a shaft seal for added protection.
Q: How is the connection made on the MDD071C-N-060-N2S-095GL2 motor and in which direction?
A: The electrical connection is made via a connector oriented to the left side of the motor.
