Product Description:

The MDD071C-N-060-N2S-095GA2 is a brushless AC servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers where fast response and high positioning accuracy are required in packaging lines, printing presses, and automated handling systems. By converting commanded current into proportional torque, the unit provides regulated mechanical energy that supports coordinated multi-axis motion. Its brushless design also reduces routine wear associated with commutation components and helps maintain stable performance in repeated duty cycles.

At standstill, the motor can deliver a continuous torque of 6.6 Nm, enabling it to support static loads without exceeding its thermal rating. An integrated blocking brake provides a retaining capacity of 6.5 Nm, so vertical axes remain secure when power is removed. At rated operation, the rotor reaches a nominal speed of 6000 rpm, which supports rapid indexing and high-speed servo tasks. The centering shoulder diameter is 95 mm, which helps position the stator concentrically against a machine surface for accurate alignment. Rotor and flange are balanced to the standard quality class, and the motor connections are located on side A for a consistent cable exit direction.

A keyed circular connector carries phase conductors, brake power, and feedback signals in a single shell, which reduces the number of separate cable interfaces at the motor. Closed-loop control accuracy is maintained through digital servo feedback (DSF), allowing the drive to monitor rotor position directly during motion. The motor uses size code 071 with length code C, giving it a compact footprint for dense machine layouts. Its plain output shaft is fitted with a shaft seal that limits fluid ingress and retains grease during continuous cycles. The housing uses a standard finish, and the motor has a single-ended shaft without a side-B extension.