Product Description:

The MDD071C-N-060-N2S-095BG0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for use with compatible digital drive controllers, it converts drive output into accurate rotary motion so automated stations can index, position, or follow a commanded speed profile under closed-loop control. The motor is suitable for pick-and-place arms, textile winders, and compact packaging modules where repeatable starts, stops, and speed changes are required. Its mounting geometry follows the series pattern, which helps it fit machine layouts that already use this motor platform.

The motor’s nominal speed reaches 6000 rpm, giving short cycle times when high shaft velocity is necessary. At standstill it produces 6.6 Nm of continuous torque, allowing the axis to support moderate loads without exceeding thermal limits. A centering shoulder of 95 mm aligns the stator housing on the machine frame and helps maintain concentricity between the rotor and driven components. Position data is provided through digital servo feedback (DSF), enabling the controller to correct speed and angle with high resolution. Because the unit is supplied without a blocking brake, any vertical or overhung load must be held by external mechanical means or continuous drive torque during power-off states.

The rotor uses standard balancing, so couplings sized for typical factory speeds can be mounted without extra vibration correction. The motor has a frame size of 071 and a length code of C, which provide a compact footprint with inertia suited to responsive acceleration. A standard housing encloses the windings and accepts the normal flange pattern used for this motor type. The shaft is single-ended, which keeps the non-drive end clear and supports straightforward integration into machine assemblies.