Product Description:

The MDD071C-N-060-N2L-095PB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers where closed-loop positioning and velocity control are required in industrial automation equipment such as pick-and-place gantries, indexing tables, and packaging axes. The motor produces speed-controlled rotary motion and works with compatible drive electronics for accurate command response and continuous feedback monitoring.

This motor develops a continuous standstill torque of 6.6 Nm, allowing it to hold load during static portions of a duty cycle without excessive heating. Its rated mechanical speed reaches 6000 rpm, which supports fast indexing and short travel times in high-speed machinery. The centering flange has a diameter of 95 mm, which sets the locating fit for rigid mounting on machine frames. Power and sensor cabling exit on Side B, which can simplify cable routing when the cabinet or cable track is positioned behind the motor. A shaft seal is installed at the output end to help limit the entry of coolant or particulates during operation. Rotor position information is provided by digital servo feedback, allowing precise commutation, stable speed regulation, and dependable position reporting across the operating range.

The motor uses frame size 071 with length class C, giving it a compact format that still provides the thermal capacity needed for multi-axis assemblies. The output shaft uses a keyway so torque can be transferred to couplings or pulleys without slip during repeated acceleration and deceleration. The build does not include a blocking brake, so a separate holding method is required when the axis must remain fixed after power is removed. Internal rotor balancing remains standard, which helps keep vibration low during normal operation.