MDD071C-N-040-N2T-095PR0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071C-N-040-N2T-095PR0 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor has a nominal speed of 4000 rpm and provides a continuous torque of 6.6 Nm at standstill. It features an integrated multiturn absolute encoder and a keyway shaft with a centering diameter of 95 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-040-N2T-095PR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied in the MDD Synchronous Motors series. It connects to digital drive controllers to provide closed-loop torque and velocity for automated assembly stations, packaging lines, and material-handling equipment. Its standard housing and factory balancing support direct mounting to machine frames while maintaining consistent dynamic behavior. Serving as an electromechanical actuator, the unit converts electrical energy from a drive into precise rotary motion for repeatable positioning tasks within industrial automation cells. The motor is suited for axes that need stable torque response during starts, stops, and speed changes under closed-loop control.
At standstill, the motor supplies a continuous torque of 6.6 Nm, allowing it to hold or inch loads without thermal overload. During motion, it reaches a nominal speed of 4000 rpm, giving a broad velocity range for indexing and rapid traverse cycles. Precise seating is obtained through the 95 mm centering shoulder that aligns the flange to adjacent machine parts. All cabling exits on the right side via a plug-in connector, which helps when neighboring components limit cable routing space. Position data comes from the factory-installed integrated multi-turn absolute encoder, so the drive can retain rotor position information after power cycling and resume controlled motion without a reference move.
The unit has size code 071 with length variant C, resulting in a compact body that fits restricted mounting zones. A durable shaft seal protects the front bearing, and the shaft has a keyway for standard couplings. Motion feedback is provided as digital servo feedback (DSF), enabling noise-immune high-resolution commutation in the drive. Because the model is supplied without a blocking brake, any vertical axis must use external holding methods. The single-ended shaft arrangement reduces rear clearance requirements when the motor is installed near panels or guarding.
Frequently Asked Questions about MDD071C-N-040-N2T-095PR0:
Q: What type of encoder is included in the MDD071C-N-040-N2T-095PR0 motor?
A: The MDD071C-N-040-N2T-095PR0 features an integrated multiturn absolute encoder for precise position feedback.
Q: What is the continuous torque at standstill of the MDD071C-N-040-N2T-095PR0?
A: This motor delivers a continuous torque of 6.6 Nm at standstill for consistent operation.
Q: What is the nominal speed capability of the MDD071C-N-040-N2T-095PR0?
A: The MDD071C-N-040-N2T-095PR0 operates at a nominal speed of 4000 min⁻¹.
Q: What type of shaft and sealing does the MDD071C-N-040-N2T-095PR0 offer?
A: A standard keyway shaft with shaft seal is provided on this model, preventing contamination ingress.
Q: How is the electrical connection oriented on the MDD071C-N-040-N2T-095PR0?
A: The electrical connection is a right-facing connector for straightforward installation.
