Product Description:

The MDD071C-N-040-N2T-095PA0 is a synchronous servo motor from Bosch Rexroth Indramat in the MDD Synchronous Motors series. It is intended for use with digital drive controllers and delivers precise rotary motion for automated assembly lines, pick-and-place units, and packaging stations that require closed-loop velocity and torque regulation. The motor incorporates an integrated multi-turn absolute encoder for high-resolution position data. Its standard housing and standard dynamic balancing support direct machine mounting and stable operation in automated equipment.

The motor’s continuous stall torque is 6.6 Nm, allowing it to hold static loads for extended periods without thermal overload. Under rated excitation, it reaches a nominal speed of 4000 rpm, allowing fast cycle rates in compact servo axes. Precise alignment with the driven machine is achieved through a 95 mm centering diameter on the mounting flange. All power, feedback, and brake conductors exit on side A through a single industrial connector, which helps keep cable routing orderly. Standard dynamic balancing reduces residual vibration, and the C length code places the motor in the mid-length version of the 071 frame.

Position and speed information are transmitted as Digital servo feedback (DSF), so the controller receives motor feedback without requiring a separate external transducer. The output uses a keyway shaft interface for positive mechanical engagement, and the fitted shaft seal helps block lubricant or coolant ingress at the bearing journal. The motor is supplied without a blocking brake, so any application that must hold position during power loss needs external locking or drive-applied holding torque. Its single shaft end on side A and motor size 071 help keep the mechanical arrangement compact for medium-power servo axes.