Product Description:

The MDD071C-N-040-N2T-095GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts electrical power from the drive into rotational motion for indexing tables, pick-and-place axes, and other automated assemblies where closed-loop speed and position control are required. This arrangement allows the motor to support precise starts, stops, and repeatable motion in machinery that depends on accurate axis response.

This model delivers a continuous standstill torque of 6.6 Nm, enabling it to hold or slowly move loads without overheating. Its nominal speed reaches 4000 rpm, which is the maximum steady-state speed under rated conditions. A built-in blocking brake supplies 3.0 Nm of static holding torque so vertical or suspended loads remain fixed when power is removed. The flange has a centering diameter of 95 mm, providing a reference surface for precise concentric mounting to gearboxes or machine frames. Command and feedback signals rely on digital servo feedback, allowing the drive to monitor rotor position closely and correct deviations during operation.

An integrated multiturn absolute encoder reports the shaft angle across multiple revolutions, so the control system retains position information after power cycles. The output side uses a plain shaft, which simplifies coupling to pulleys or flexible couplers while keeping the mechanical interface straightforward. Power and feedback conductors exit on the left side through a sealed connector, a layout that can simplify cable routing in compact machine spaces. The motor belongs to size code 071, and its standard housing, shaft seal, and dynamic balancing support reliable operation in general-purpose industrial service. These features make the motor suitable for applications that need stable feedback, secure holding at rest, and consistent rotary performance during repeated production cycles.