Product Description:

The MDD071C-N-040-N2S-095PR1 is a servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. It is intended for use with digital drive controllers and delivers commanded torque and speed to linear or rotary axes in automated assembly, packaging, and material-handling equipment. An internal position transducer, a sealed housing, and a preconfigured wiring interface let the motor fit into compact installation spaces while supporting accurate, repeatable motion. This arrangement suits machines that require stable positioning during frequent start-stop cycles.

This model provides a continuous standstill torque of 6.6 Nm, so the axis can hold static loads without overheating the windings. During motion, it reaches a nominal speed of 4000 rpm, which matches high-response drive operation. Alignment with adjacent mechanics is supported by a centering diameter of 95 mm, which provides a concentric register for flange mounting. All electrical terminations exit on the right side, and a sealed connector simplifies cable attachment. Closed-loop control is handled through integrated digital servo feedback, which supplies incremental position data to the controller for fast correction when load or inertia changes.

For emergency stops or vertical axes, a blocking brake rated at 3.0 Nm engages automatically when supply power is removed, helping prevent back-driving of the connected mechanism. The drive train couples through a keyway shaft, and a fitted shaft seal helps limit the ingress of dust and coolant at the bearing face. Standard dynamic balancing keeps vibration within ISO limits across the 071 frame, and the C length code provides the additional stack height used for this torque class. The housing follows the standard enclosure style of the series and uses the mounting geometry associated with this frame.