Product Description:

The MDD071C-N-040-N2S-095PL0 is an AC servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts electrical commands into precise shaft motion for positioning and speed tasks in automated machinery. Its compact frame uses the 071 size with a C length code, so it fits easily into multi-axis assemblies where space and dynamic response are important. By integrating electronic feedback and a sealed shaft interface, the unit supports closed-loop control in packaging lines, pick-and-place gantries, and other industrial axes that require repeatable cycling. This layout also suits machines that need fast starts, short settling times, and stable motion through frequent duty cycles.

A centering collar of 95 mm seats the housing accurately, and the power and feedback plugs exit on the left, which helps streamline cable routing along machine guards. The rotor can deliver a continuous standstill torque of 6.6 Nm; when paired with a suitable inverter, this rating indicates the static load it can hold without overheating. Rated speed reaches 4000 rpm, giving adequate headroom for high-throughput indexing before field weakening. Position data is returned through Digital servo feedback (DSF), allowing the drive to correct error within a control cycle. Output is transmitted by a shaft machined with a keyway, which provides positive coupling to pulleys or couplings.

The motor operates without a blocking brake, so any holding force must be generated by the drive or an external clamp. The electrical interface uses a single-piece connector, which simplifies connection and helps keep the installation compact. Motor size 071 keeps inertia low, while the C length code provides a longer active stack for higher power density. A factory-installed shaft seal prevents lubricant escape and restricts dust ingress, and the housing is supplied in the standard finish. The single shaft end on side A reduces secondary overhang loads and can simplify coupling arrangements in compact machine frames.