Product Description:

The MDD071C-N-030-N2T-095PR1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded current is converted into precise torque and speed for positioning, feed, and handling axes in packaging, assembly, and transfer equipment. The motor uses size 071 geometry with length code C, and its housing follows a standard cooled enclosure that suits enclosed machine installations. A keyway shaft and a standard shaft end without a side-B extension support direct coupling to pulleys or gearboxes while keeping the motor envelope compact.

The front flange has a centering diameter of 95 mm, which helps seat the motor accurately on the machine interface. The motor provides a continuous standstill torque of 6.6 Nm, giving the drive stable holding capability under commanded current at zero speed. Its nominal speed is 3000 rpm, which fits many servo applications that require a broad operating range without sacrificing responsiveness. Power and feedback conductors leave on the right side, and the motor uses digital servo feedback so the drive can process position and velocity data with high resolution.

For axes that must remain secured when power is removed, the integral blocking brake supplies 3.0 Nm of holding torque. Position retention over several revolutions is supported by an integrated multi-turn absolute encoder, which allows the controller to retain absolute position information after shutdown. The drive end is fitted with a shaft seal to help limit lubricant ingress near the coupling area, and the rotor uses standard balance quality to support smooth rotation across the operating speed range. These features suit applications that include vertical mounting, repeated starts and stops, or load-holding requirements.