Product Description:

The MDD071C-N-030-N2T-095GR2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is selected for closed-loop automation tasks that demand accurate torque delivery and stable velocity control in conveyor segments, pick-and-place gantries, and other electrically coordinated machine axes. Its synchronous design supports repeatable acceleration and controlled positioning when paired with a compatible digital drive. This type of motor is commonly used where the controller must hold position at low speed and transition smoothly into higher-speed motion without losing feedback accuracy.

The motor reaches a nominal speed of 3000 rpm, allowing it to match common drive frequencies without mechanical gearing. A continuous standstill torque of 6.6 Nm supports stationary load holding, while the fitted blocking brake adds 6.5 Nm of braking torque when power is removed. Rotor balance is standard, and a centering pilot of 95 mm simplifies coaxial mounting to gearheads or flanges. Cable entry uses a right-side connection orientation through a single connector, keeping power and feedback conductors grouped in one location. Size code 071 and length code C indicate the motor's frame arrangement, and the standard aluminum housing supports consistent heat transfer during operation.

Position data are resolved by an integrated multi-turn absolute encoder that works with digital servo feedback (DSF) for real-time commutation and closed-loop control. The motor uses a plain shaft for compression couplings, and a shaft seal helps limit lubricant migration in lightly contaminated environments. The unit also has a standard single-ended shaft arrangement and a standard housing finish for general industrial use.