Product Description:

The MDD071C-N-030-N2T-095GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded current into rotary motion for positioning and speed control in automated machinery and transfer lines. Its integrated multiturn absolute encoder and standard balancing profile support repeatable motion in packaging systems, electronics assembly stations, and material handling equipment. The synchronous design also helps the drive maintain smooth response during indexing, acceleration, and controlled stopping.

The motor has a nominal speed of 3000 rpm, which supports fast axis movement under rated conditions. At standstill, it can deliver 6.6 Nm of continuous torque, allowing the axis to hold load without excessive heat buildup. Position and velocity signals are provided through digital servo feedback, which sends absolute and incremental data to the controller for closed-loop operation. A centering diameter of 95 mm keeps the motor aligned in the mounting flange and helps maintain concentric rotation with the driven mechanism. The output uses a plain shaft, which is suitable for clamping couplings and other direct-drive connections.

The integrated blocking brake provides 3.0 Nm of holding torque for axes that must remain in place when power is removed. Power and feedback leads exit on the left side, which can simplify cable routing when moving components or guards limit access on the opposite side. Connections use a compact connector interface, and the motor includes a standard housing with a shaft seal to help keep dust, coolant, and lubricant away from internal parts. Size code 071 identifies the frame envelope used for this motor version. Length code C indicates a longer stack than shorter variants in the same frame, which supports higher torque capacity within the same basic footprint.