MDD071C-N-030-N2T-095GB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911263630
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
53 Seconds
The Bosch Rexroth Indramat MDD071C-N-030-N2T-095GB2 is a motor from the MDD Synchronous Motors series, designed for digital drive controllers and features an integrated multiturn absolute encoder. It provides a continuous torque at standstill of 6.6 Nm and includes a holding brake with 6.5 Nm brake torque. The motor has a 95 mm centering diameter, a plain shaft with shaft seal, and uses digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MDD071C-N-030-N2T-095GB2 is an AC synchronous servo motor produced for the MDD Synchronous Motors series. It is used as a motion-axis component with digital drive controllers where closed-loop position and velocity regulation is required in automated packaging machines, transfer stations, and material-handling lines. By converting drive current into controlled torque, the unit supports repetitive indexing, accurate positioning, and steady continuous rotation in industrial automation equipment. In automated cells, that behavior helps the drive follow commanded motion profiles without lag or drift that would reduce cycle consistency.
The motor uses a centering flange of 95 mm to locate the housing accurately during installation. Electrical and feedback cables exit on side B through a compact connector interface that matches the series cable sets and helps keep routing orderly at the rear of the motor. At stall, the motor can deliver 6.6 Nm of continuous torque, and rated operation reaches 3000 rpm for mid-frame loads. The motor has size 071 with length code C, and the standard housing includes a shaft seal that helps protect the bearings from contaminants. A single shaft end is provided on the drive side only, which leaves the rear of the motor free of a secondary extension. Rear cable exit can be useful where the motor is mounted close to guarding, slides, or machine frames that limit side clearance.
For vertical axes and controlled stops, the motor includes a blocking brake with 6.5 Nm of holding torque that engages when power is removed. Position information is provided by an integrated multi-turn absolute encoder, and commutation signals are returned to the controller through digital servo feedback (DSF) channels for closed-loop operation. This arrangement allows the drive to retain position awareness after power returns and maintain accurate rotor alignment during motion. Mechanical power is transmitted through a plain shaft, which allows direct coupling to precision gearboxes, pulleys, and clamp-style hubs without a keyway. Standard dynamic balancing helps support smooth running during normal servo operation.
Frequently Asked Questions about MDD071C-N-030-N2T-095GB2:
Q: What is the continuous torque at standstill provided by the MDD071C-N-030-N2T-095GB2 motor?
A: This model offers 6.6 Nm of continuous torque at standstill for reliable performance in demanding motion tasks.
Q: What type of encoder is included in the MDD071C-N-030-N2T-095GB2?
A: The MDD071C-N-030-N2T-095GB2 includes an integrated multiturn absolute encoder for precise position feedback.
Q: Does the MDD071C-N-030-N2T-095GB2 come with a holding brake and what is its torque?
A: A blocking brake with a holding brake torque of 6.5 Nm is included on this motor.
Q: Where is the electrical connection located on the MDD071C-N-030-N2T-095GB2?
A: This MDD synchronous motor has its electrical connection on Side B and uses a connector interface.
Q: What is the shaft configuration of the MDD071C-N-030-N2T-095GB2 motor?
A: The shaft is a plain shaft with a shaft seal, and there is no side B shaft end included.
