MDD071C-N-030-N2T-095GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911259490
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
28 Seconds
The Bosch Rexroth Indramat MDD071C-N-030-N2T-095GA2 is part of the MDD Synchronous Motors series and features a standard housing and plain shaft with a 95 mm centering diameter. This motor includes a multiturn absolute encoder and digital servo feedback, providing continuous torque at standstill of 6.6 Nm and nominal speed of 3000 rpm. It is equipped with a blocking brake offering 6.5 Nm holding torque and uses a connector for side A connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-030-N2T-095GA2 is a synchronous motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Supplied as a motor for digital drive controllers, it converts controlled three-phase power into precise rotary motion in automated assembly lines, packaging equipment, and material-handling stations. Its profile and interface make it suitable for compact multi-axis systems that demand repeatable speed and torque under closed-loop control. It also fits servo axes where compact mounting and predictable motion behavior are important.
During continuous standstill, the rotor can generate 6.6 Nm of torque, allowing the axis to support static process loads indefinitely. Under motion, the mechanical output can reach a rated speed of 3000 min⁻¹, which suits medium-speed applications that need fast positioning without an oversized motor frame. The motor is delivered with a blocking brake that supplies 6.5 Nm of holding torque, so vertical or suspended axes can remain secured when control power is removed. The flange centers against a 95 mm pilot diameter, and standard dynamic balancing helps keep radial vibration low during rotation. Frame size code 071 and length code C set the motor envelope for installations that use planetary gearboxes or belt drives. Digital servo feedback communicates rotor position through a high-resolution serial channel.
All electrical connections exit on Side A, and a keyed connector supports orderly cable routing in confined machine spaces. The integrated multiturn absolute encoder retains positional data over multiple revolutions, enabling the control system to recover position quickly after power is restored. A shaft seal protects the plain shaft area from coolant splash and airborne dust, which helps protect the bearing zone in general industrial service. The motor has no side-B shaft extension and uses a plain output geometry for direct couplings. This arrangement keeps the mechanical interface straightforward for equipment that does not require a rear shaft output.
Frequently Asked Questions about MDD071C-N-030-N2T-095GA2:
Q: What is the continuous torque at standstill for the MDD071C-N-030-N2T-095GA2 motor?
A: The MDD071C-N-030-N2T-095GA2 provides a continuous torque at standstill of 6.6 Nm, making it suitable for steady load conditions.
Q: What type of encoder is used in the MDD071C-N-030-N2T-095GA2?
A: This motor features an integrated multiturn absolute encoder for precise positioning and feedback.
Q: Is there a holding brake included on the MDD071C-N-030-N2T-095GA2, and what is its torque rating?
A: A blocking brake is included on this model, delivering a holding brake torque of 6.5 Nm.
Q: What is the connection direction and type for this motor's electrical interface?
A: The electrical connection on the MDD071C-N-030-N2T-095GA2 is configured as a connector on Side A.
Q: What shaft configuration does the MDD071C-N-030-N2T-095GA2 motor use?
A: This motor uses a plain shaft with a shaft seal and does not have a shaft end on side B.
