MDD071C-N-030-N2T-095GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911265080
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
45 Seconds
The Bosch Rexroth Indramat MDD071C-N-030-N2T-095GA1 is a motor for digital drive controllers and part of the MDD Synchronous Motors series. It features a nominal speed of 3000 rpm, a continuous torque at standstill of 6.6 Nm, and a plain shaft with a 95 mm centering diameter. The motor comes with a standard housing, integrated multiturn absolute encoder, and a blocking brake with a holding torque of 3.0 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-030-N2T-095GA1 is a motor for digital drive controllers built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a permanent-magnet synchronous unit, it converts command currents from a servo amplifier into controlled mechanical rotation for positioning tasks, indexing tables, and general motion sequences on automated machinery. The C length code and 071 frame size place it in the medium power range, while standard housing and balancing keep installation straightforward inside electrical enclosures. Its permanent-magnet rotor helps the drive produce responsive torque changes during rapid starts, stops, and reversals.
Its continuous torque at standstill reaches 6.6 Nm, allowing the axis to hold loads without overheating when the rotor is locked. Under rated excitation, the rotor spins at a nominal speed of 3000 rpm, a common value for servo loops that need quick response yet moderate gearbox ratios. The front-face centering diameter of 95 mm aligns the flange to machine frames and ensures concentricity. Power and feedback cables exit on side A through a keyed connector, simplifying cable routing in compact cabinets. Position data is generated by the integrated multi-turn absolute encoder, so the controller always knows shaft position even after power loss. Standard housing and plain balancing minimize vibration and simplify alignment during these duty cycles.
The blocking brake integrated on the non-drive side applies 3.0 Nm of torque to hold the axis when supply power is removed, preventing drift on vertical loads. Feedback to the drive is transferred through Digital servo feedback (DSF), giving high-resolution incremental and absolute data for speed and current loops. Mechanical output is delivered through a plain shaft with a standard single-ended design, so couplings or pulleys mount directly without secondary machining. The standard shaft seal keeps lubricants inside and contaminants out under routine washdown or coolant mist environments. This arrangement supports repeatable positioning when the axis must return to stored coordinates after an interruption.
Frequently Asked Questions about MDD071C-N-030-N2T-095GA1:
Q: What type of encoder is included with the MDD071C-N-030-N2T-095GA1 motor?
A: The MDD071C-N-030-N2T-095GA1 features an integrated multiturn absolute encoder.
Q: Does the MDD071C-N-030-N2T-095GA1 come with a holding brake?
A: This motor is supplied with a blocking holding brake delivering 3.0 Nm of braking torque.
Q: What is the nominal speed of the MDD071C-N-030-N2T-095GA1 motor?
A: The nominal speed for the MDD071C-N-030-N2T-095GA1 is 3000 min⁻¹.
Q: What feedback system does the MDD071C-N-030-N2T-095GA1 utilize?
A: This model provides digital servo feedback (DSF) for motor control and position feedback.
Q: What is the centering diameter on the MDD071C-N-030-N2T-095GA1 motor?
A: The centering diameter of this motor is 95 mm, ensuring precise mounting.
