Product Description:

The MDD071C-N-030-N2S-095PL2 is a synchronous servo motor manufactured for the MDD Synchronous Motors series. As a motor for digital drive controllers, it is used on closed-loop axes that follow commanded motion profiles in production lines, pick-and-place units, and packaging stations. A single-ended shaft, an integrated blocking brake, and a sealed housing allow the motor to connect directly to driven equipment while helping keep contaminants away from internal components. The unit is built in frame size 071 and uses a standard aluminum housing for general industrial installation.

Its mechanical interface includes a centering diameter of 95 mm, which helps align the motor accurately with the mounting surface. The rotor provides a continuous stall torque of 6.6 Nm, so the motor can support steady load demand without excessive heating under proper operating conditions. Power and feedback conductors exit on the left side through a round connector, which helps keep cable routing organized in compact machine layouts. Under rated conditions, the motor runs at a nominal speed of 3000 rpm, giving the drive a common base speed for matching inertia and transmission ratios. Standard balancing helps reduce vibration during operation at higher shaft speeds.

A holding brake rated at 6.5 Nm keeps the shaft from drifting while the axis is at standstill, which is useful on vertical or indexing applications. Position information is supplied through digital servo feedback (DSF), allowing the controller to regulate motion without an external encoder. The output shaft uses a keyway for secure coupling attachment, and the motor has length code C, which gives it a housing depth suited to the installed windings. The shaft seal helps protect the bearing area, and the shaft end is supplied without a side B extension.