Product Description:

The MDD071C-N-030-N2S-095GR0 is a synchronous motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers and converts controlled three-phase current into accurate rotary motion for positioning or regulating axes in gantries, feeders, and tool changers. This motor supports closed-loop motion where stable torque, repeatable speed, and precise response are required in automated machinery.

The centering diameter measures 95 mm, providing a pilot fit that aligns the motor housing with the machine mounting surface. At standstill, it sustains 6.6 Nm of continuous torque, which supports load holding or low-speed indexing without thermal overload. Under rated excitation, the rotor reaches a nominal speed of 3000 rpm, making it suitable for common industrial duty cycles. The electromagnetic stack uses motor length code C, and the motor has standard balancing to help limit residual vibration during operation.

Power and feedback leads exit on the right side, and a circular connector simplifies cable attachment. Position data returns through digital servo feedback (DSF), giving the drive high-resolution angle information for closed-loop control. A fitted shaft seal helps block liquids and dust from the bearing cavity, while the plain shaft end provides a smooth coupling surface and there is no secondary shaft on side B. The unit is supplied without a blocking brake, so load holding after power removal must be provided by external clamping or motor torque. The standard housing and frame size 071 support integration into factory automation equipment. This product is available from Wake Industrial with a 1-year warranty - ask about available shipping options when speaking to a Wake Industrial representative.