MDD071C-N-030-N2S-095GL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911285335
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
48 Seconds
The Bosch Rexroth Indramat MDD071C-N-030-N2S-095GL2 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. This motor features a nominal speed of 3000 min⁻¹, a centering diameter of 95 mm, and provides a continuous torque at standstill of 6.6 Nm. It comes with a plain shaft and a holding brake with a torque of 6.5 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-030-N2S-095GL2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It pairs with digital drive controllers to convert commanded current into repeatable rotary motion for tooling carriages, feed rollers, and indexing tables. Closed-loop operation lets the axis respond quickly to changing load conditions while maintaining position accuracy during start, stop, and reversal. This makes the motor suitable for packaging equipment, material-handling systems, and other automated machines that require repeated acceleration and precise stopping. The 071 frame size and C-length stator keep the assembly compact, which helps when several axes must fit inside one machine envelope.
The motor provides a continuous standstill torque of 6.6 Nm, which supports loaded holding and low-speed positioning while the windings remain energized. Its maximum speed reaches 3000 rpm, allowing direct coupling to gearless axes that need fast indexing and quick cycle recovery. An integrated blocking brake supplies 6.5 Nm of holding torque so the shaft can remain secured after drive power is removed. Power, brake, and feedback leads leave through a left-side connector, which keeps cable routing concentrated at one exit point. Position signals are returned through digital servo feedback, giving the drive closed-loop rotor information for stable speed and position control.
The mounting interface uses a 95 mm centering pilot that helps align the flange with a gearbox or machine plate during installation. The rotor uses standard balancing, which suits general industrial duty without special balancing hardware. The output uses a hardened plain shaft, and the front end includes a shaft seal to help keep coolant or lubricant away from the bearing area. The shaft is provided only on side A, while side B remains closed in the standard shaft-end arrangement. Rotor inertia remains moderate, which helps support responsive acceleration and stable motion control. The sealed connector layout and standard housing construction help protect the motor from dust and incidental fluid spray in typical industrial settings.
Frequently Asked Questions about MDD071C-N-030-N2S-095GL2:
Q: What is the continuous torque at standstill for the MDD071C-N-030-N2S-095GL2 motor?
A: The MDD071C-N-030-N2S-095GL2 provides a continuous torque of 6.6 Nm at standstill.
Q: What type of motor feedback does the MDD071C-N-030-N2S-095GL2 use?
A: A digital servo feedback (DSF) system is used for motor feedback in this model.
Q: Does the MDD071C-N-030-N2S-095GL2 motor include a holding brake and what is its torque?
A: The MDD071C-N-030-N2S-095GL2 is equipped with a blocking brake that provides 6.5 Nm of holding brake torque.
Q: What is the connection direction and type for the MDD071C-N-030-N2S-095GL2 motor?
A: This motor features a connector type electrical connection oriented to the left.
Q: What is the centering diameter of the MDD071C-N-030-N2S-095GL2 motor?
A: The MDD071C-N-030-N2S-095GL2 has a centering diameter of 95 mm for mounting purposes.
