Product Description:

The MDD071C-N-030-N2S-095GL1 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is a brushless AC servo motor with size 071 and length code C. Designed for digital drive controllers, it provides closed-loop motion for positioning and speed regulation in machine tools, packaging lines, and assembly stations. The motor is intended for applications that require accurate response to changing commands and stable operation during repeated start-stop cycles.

This model reaches a nominal speed of 3000 rpm, allowing fast cycle execution with compatible inverters. At standstill, it can deliver 6.6 Nm continuously, so the axis can hold process loads without overheating. A centering diameter of 95 mm helps align the motor concentrically with gearboxes or direct-drive mounts. Dynamic feedback is provided through digital servo feedback, and the encoder signal gives the drive precise position information during motion. Rotor and fan components are balanced to the Standard class to reduce vibration during acceleration and deceleration. This combination supports smooth speed control and consistent positioning across repetitive operating cycles.

Connection hardware is arranged on the left side, where a keyed power connector and a separate feedback plug help shorten wiring loops in tight cabinets. A built-in blocking brake provides 3.0 Nm of holding torque to secure vertical or suspended axes when power is removed. The output uses a plain shaft with a factory-installed shaft seal that helps keep lubricant away from the stator chamber. The motor has a single shaft end, and there is no shaft extension on side B, which keeps the overall envelope compact. This layout supports straightforward integration where cable routing space is limited and controlled holding is required at standstill.