MDD071C-N-030-N2S-095GA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911265067
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
20 Seconds
The Bosch Rexroth Indramat MDD071C-N-030-N2S-095GA0 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. This motor features a continuous torque at standstill of 6.6 Nm and a nominal speed of 3000 rpm. It has a 95 mm centering diameter, plain shaft with seal, and uses digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-030-N2S-095GA0 synchronous servo motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts drive commands into precise rotary motion for positioning and speed-controlled tasks on assembly lines, packaging equipment, and material-handling axes. Its compact design supports mid-range industrial axes where stable torque response and accurate speed regulation are required. When paired with a compatible controller, the motor supports repeatable motion in systems that must start, stop, and reverse direction with controlled timing.
A centering pilot of 95 mm aligns the 071-frame housing on precision mounting faces. The connections exit on side A through a sealed connector that carries power and feedback lines, which helps keep cable routing orderly near the machine interface. The motor provides a continuous stall torque of 6.6 Nm, allowing it to hold load at zero speed without exceeding its thermal limit under rated conditions. Its rated speed reaches 3000 rpm, which suits cyclic motion and transfer applications that need both steady torque and rapid axis movement. The C length code gives this motor the longest housing in the 071 frame, providing additional winding space for the stated output, while the aluminum housing helps dissipate heat during operation.
Closed-loop control is provided by digital servo feedback (DSF), allowing the drive to monitor rotor position and speed with high resolution. At the output end, a shaft seal helps limit contamination ingress, and the plain shaft supports clamp-style or other keyless hub couplings. Motion quality is supported by standard balancing, which helps reduce vibration across the operating speed range. The motor is supplied without a blocking brake, so any static load must be held by drive torque or by an external mechanical holding device. The shaft is also built without a second shaft end, which simplifies coupling on installations that use a single driven output.
Frequently Asked Questions about MDD071C-N-030-N2S-095GA0:
Q: What is the continuous torque at standstill for the MDD071C-N-030-N2S-095GA0 motor?
A: The MDD071C-N-030-N2S-095GA0 delivers a continuous torque at standstill of 6.6 Nm.
Q: What type of motor feedback does the MDD071C-N-030-N2S-095GA0 provide?
A: This model utilizes digital servo feedback (DSF) for precise positional information.
Q: What is the nominal speed of the MDD071C-N-030-N2S-095GA0?
A: The nominal speed of this MDD series motor is 3000 min⁻¹.
Q: Does the MDD071C-N-030-N2S-095GA0 come with a shaft seal?
A: This motor includes a shaft seal on its plain shaft, helping prevent contamination.
Q: Is a holding brake included on the MDD071C-N-030-N2S-095GA0 motor?
A: The MDD071C-N-030-N2S-095GA0 does not include a holding brake.
